Review and cite AUTOMOTIVE ENGINEERING protocol, troubleshooting and other methodology information | Contact experts in AUTOMOTIVE ENGINEERING to get answers
2,537 views 465 posts
Questions related to Automotive Engineering
We are trying to use a simple extension of the temperature rise method used by the IPCs but the calculated values are not accurate to the reality values.
30 December 2015 4,097 3 View
I have used white noise filtration method for the generation of road profile from the PSD spectrum using MATLAB. A band limited white noise or white Gaussian noise (wgn) is given as input to the...
25 December 2015 2,572 2 View
I want to optimize a hybrid vehicle to provide the energy needed to do so that the electricity needed by petrol (gasoline) than any solar cells what I choose to both administrative costs and also...
21 December 2015 8,504 4 View
I have a part which is integrated with foam in the back is bolted to another Metal part. i find the torque is not applied completely while using pneumatic or electric gun. No issues observed while...
21 December 2015 9,759 2 View
I have written a simple plane stress code in the VUMAT format but unfortunately the third strain (StrainInc(k,3)) is zero and I need to calculate it by myself. the problem is that, by the...
21 December 2015 4,558 1 View
If i have develop new biocomposite i.e Natural fiber reinforced PP. What are the Properties to be find it out. to find applicability of developed material for automotive. Specifically Instrument...
07 December 2015 7,032 4 View
I have to perform a literature review on metasurfaces for stealth design
01 December 2015 1,458 3 View
I have been working on the development of a manual transmission simulation model, in the physical system modeling tool (Simscape and Simdriveline), by implementing a synchromesh unit consisting of...
28 November 2015 2,230 1 View
Shift shock is the jolt felt when transmission changes gear. This jerk or shock feeling is observed in lower gear shift (i.e 1-2 or 2-3) and not in higher gears shift (i.e 5-6 or 6-7). What is the...
26 November 2015 6,454 3 View
i want to study about the parameter in use for engine (piston) in car
25 November 2015 4,700 1 View
How water injector spray works and the mechanism that can makes it spread into various pattern?
23 November 2015 6,256 2 View
I want to know the procedure/process/ function of ball tester.
17 November 2015 266 4 View
Different customer always different duty cycle for qulification test. Has anyone analyzed the severity of duty cycle?
12 November 2015 2,567 3 View
I need to identify some good Labs placed in Northern Italy to be able to make vibrations, thermal cycling, ingress protection, salt spray and cold soak tests for automotive application (and not...
12 November 2015 5,611 5 View
If I were to place a device that would ventilate and bring down the temperature of a diesel powered electric generator (for commercial use eg. Buildings or large homes) be useful in making the...
05 November 2015 8,218 2 View
Is there any formula to estimate the rotational speed of turbocharger turbine without looking into performance map? With an Avg mass flow rate of 26.5 g/s and 1.75 bar pressure before turbine. The...
05 November 2015 939 4 View
I understood what support have to be taken while analysis and where then force should act. I want to known what are the formula of forces acting on steering knuckle.
04 November 2015 1,242 1 View
We are facing the problem of grunt noises in our steering systems. Please advise whether we should increase the number of balancing grooves on the spool.
02 November 2015 6,597 2 View
Hi all, I am searching for a composite material which will be effective as like existing material used in Automobile drive shafts. I have to do FEA analysis using ANSYS 14.5 and submit a...
02 November 2015 4,885 6 View
Consider a case where the wheels of the vehicle are not locked. So the kinetic energy of the vehicle is dissipated through heat from the disc brakes and a little amount of energy as frictional...
01 November 2015 798 7 View
I am using a Vehicle speed sensor to record data on the Vehicle CAN Bus in the form of digital data with sampling rate of 100 ms. Now I intend to remove the possible noise in measurement using...
30 October 2015 266 3 View
i have...pressure, temperature, compression ratio, fuel quantity...
27 October 2015 5,479 2 View
I would like to understand on how to use the Nichols chart. Can anyone please share any materials or any link to understand it better.
27 October 2015 7,466 3 View
i am currently building a project consisting of water injection using GDI Injector for water injection into a 4 cylinder diesel engine. the calculation i search from the internet does not explain...
26 October 2015 6,255 3 View