Review and cite AUTOMOTIVE ENGINEERING protocol, troubleshooting and other methodology information | Contact experts in AUTOMOTIVE ENGINEERING to get answers
2,541 views 465 posts
Questions related to Automotive Engineering
I would like to compare it with normal turbocharger in term working principle and aspect ratio(A/r)
24 April 2017 1,205 3 View
V type engine or boxter? because I have read that boxter engine give the car more stability with lower COG intact to the ground such as in Subaru model.
24 April 2017 218 2 View
A comparison for both positive and negative camber.
24 April 2017 2,206 3 View
The mean effective pressure is a quantity relating to the operation of a reciprocating engine and is a valuable measure of an engine's capacity to do work that is independent of engine displacement.
23 April 2017 7,478 1 View
Compression ration is a fundamental specification for many common combustion engines.
23 April 2017 7,124 5 View
like in bikes and cycles
22 April 2017 7,495 4 View
Is it depends on engine types?
22 April 2017 951 2 View
Road safety normally hinges on the environment, roadway and vehicular factors. The interaction between vehicles is largely ignored in road safety analysis. How can we factor vehicular interaction...
20 April 2017 942 3 View
I am working on a system that needs to detect Road accidents to initiate its processing. i am trying to particularity monitor a human being instead of any vehicle in which he might be traveling....
17 April 2017 1,656 5 View
We are currently working on designing suspension for our next formula style race car. How can we optimize our previous geometry so that vehicle handling is improved as well as unsprung mass is...
13 April 2017 3,435 3 View
I want to design a engine with both 4 stroke and 2 stroke for better torque and lower fuel consumption. I want to know if we design a engine with both 2 stroke and 4 stroke, what would be...
10 April 2017 4,904 9 View
The bionic car which is a concept car is said have an good aerodynamic shape. It having a larger frontal area is cited as a reason.
07 April 2017 7,839 9 View
The performance and emissions of SI and CI engines are known to be very much related to the external load, throttle position and speed of the engine. But no books or literature are clearly...
23 March 2017 1,180 7 View
I'm developing an EEV modeling, and I'm using this equation: m=CD*A*2/3*sqrt(2*rho*Pi*Fsigma*XT) My main question is about A (Flow area) this diameter it has to be the one inside the valve (before...
16 March 2017 2,896 3 View
How I calculate the mean effective pressure of cylinder in diesel engines. please explain also..
04 March 2017 7,739 14 View
I need the exhaust temperature for different engine speed. I also need the exhaust mass flow rates for the same speeds. I would appreciate if I could be refer to approach company to help or if...
15 February 2017 10,061 4 View
In small passenger cars the petrol engine is favoured over the diesel engine although its fuel economy is worse than the diesel. What are the reasons behind that?
08 February 2017 5,367 4 View
Dear Ehsan, hi! I read a work done by your team on flameless combustion and it is very interesting. I work in a steel company in Sweden, where our furnaces are equipped with flameless oxyfuel. I...
07 February 2017 5,891 1 View
For my new project i want to change the fins which was existing in automobiles( two wheelers) l have done fins analysis in FLUENT. I want to test the prototype. tell me how to test the prototype...
06 February 2017 6,618 3 View
I am Optimizing variable moment inertia Flywheel Design for use as aKinetic Energy Recovery System for a Bicycle for FYP? if someone could guide me about any type of research in this field it will...
04 February 2017 1,491 2 View
Hi I'm taking research on "oil cooling" systems in engines especially turbo shaft engines used in Helicopters and I want to know what kind of Heat exchanger used in these systems Can any body...
04 February 2017 2,546 3 View
I need real-time values from vehicle like speed, RPM, fuel usage, break pedal position, current gear and throttle pedal use obtained via OBD-II. I have found Parameter IDs for most of them but...
03 February 2017 7,128 3 View
Why the rear wheels of the smart wheelchairs are smaller than the front wheels?
02 February 2017 443 3 View
We are analysing raw automotive data from OBD2 interface. Our research tries to identify and extract high-level data from this source. Do you know where can we find some samples of real OBD2...
01 February 2017 1,168 1 View