Review and cite AUTOMOTIVE ENGINEERING protocol, troubleshooting and other methodology information | Contact experts in AUTOMOTIVE ENGINEERING to get answers
2,540 views 465 posts
Questions related to Automotive Engineering
- in this HEV the required torque can be generated by the electric motor and the diesel engine- battery is connected to the electric motor via a converter The point is that , the vehicle consumed...
15 June 2017 3,942 2 View
Methods and procedures in order to measure the wear/aging in automotive shock absorbers in real time on the vehicle. This would be necessary to implement a degradation compensation control of the...
15 June 2017 3,437 4 View
Hi, In this year, I plan to launch tests electric buses. I am looking for examples fleet management systems (software) for a public transport - dedicated for electric buses (or diesel, hybrid and...
14 June 2017 2,246 2 View
Hello, i am building a small 1/10 scale electric car to implement my phd work. i have small IMU and a GPS not very accurate, from these sensors i can get 3 angles and 3 acceleration, total...
14 June 2017 2,622 1 View
Methods and procedures in order to measure the wear/aging in automotive shock absorbers in real time on the vehicle. What values and parameters can be used for this aim.
14 June 2017 7,990 3 View
Need some technical data for anti ackerman steering geometry.
13 June 2017 4,999 3 View
My questions are pertaining to design of semi-rigid barrier (w-beam type & thrie type) for : case-I Normal Containment as per IRC(i.e. vehicle mass=15KN and velocity at impact=110kmph and 20...
13 June 2017 8,578 2 View
I am looking for the following properties of Thermoplastic Elastomers or TPE like materials: 1.Flow resistivity (Pa.s/m^2) 2.Porosity 3.Tortuosity factor Will also like to know from experts...
26 May 2017 3,281 0 View
Kindly help me in knowing the answer for this simple question. I wanted to know the reason for conducting experiments on engines as well as on turbines at constant load and at constant speed. we...
23 May 2017 907 3 View
Is there any functional safety standard applicable to commercial heavy-duty trucks similar to ISO 26262? the problem is ISO 26262 is applied on vehicles less than 3500 kg.
16 May 2017 4,013 15 View
In FSAE events we need to use a restrictor of 20mm diameter in the upstream of intake manifold. it is to restrict the intake mass flow rate. my question is how it affects the engine power output?...
15 May 2017 9,981 2 View
I am currently looking for the root cause of cylinder-piston-rings abnormal wear in Caterpillar haul trucks 793D. It is suspected that a possible cause is the installation of a system that...
15 May 2017 9,694 1 View
1. What are the possible ways for calculating vehicle speed depends on the main operating data (Without sensor)? 2. How to calculate engine rpm without having the vehicle speed (km/hr)? We may use...
09 May 2017 3,139 8 View
In general, oversquare engine is the best optimum design for racing car. What about rally racing that might need more torque when accelerating through sand and dirt, uphill road?
01 May 2017 2,123 1 View
Modern vehicles nowadays have a better safety protection (front and side airbag, seatbelt etc). Plus, with the addition/installation of booster and child car seat for children may help with the...
26 April 2017 3,453 1 View
Why does some cars have FM (front mid) engine location, while some of them have RM (rear mid) engine locations? And how does it affects the performance of the cars itself?
26 April 2017 5,232 3 View
AWS - All Wheel Streering Sensor. Common used un Military vehicle and some in heavy manufacture vehicle.
26 April 2017 3,014 1 View
I know generally it contains a maze of channels and passages that direct hydraulic fluid to the numerous valves which then activate the appropriate clutch pack or band servo to smoothly shift to...
25 April 2017 1,229 2 View
I am currently working on the case study project on autonomous car technology, i would like to have some opinion on it.
25 April 2017 3,293 2 View
I am doing some design on suspension and need some input on it, so that I can continue with my design.
24 April 2017 5,572 3 View
Other than the octane number of petrol, what is in the fuel mixture that affect widely for the fuel performance?
24 April 2017 4,970 1 View
What consideration need to be taken when designing a exhaust system?
24 April 2017 5,548 2 View
In order to achieve fastest acceleration and top speed. 4WD or RWD? Why and why? Need a brief and solid explanation.
24 April 2017 8,550 1 View
I understand that this varies for different car but lets take a situation of a 2.0L engine with 600rpm when sat on idle.
24 April 2017 5,715 3 View