Review and cite MACHINES protocol, troubleshooting and other methodology information | Contact experts in MACHINES to get answers
4,560 views 594 posts
Questions related to Machines
The billet sawing machine thus enables to cut two rods at the same time in order to reduce the cutting time and also could be improved 50 to 75 % (approx.) of the productivity in modern...
15 November 2019 10,001 1 View
I was calibrating GC on PAINO compound was using split mode 100:1 and 0.5 uL injection volume of diluted sample and it was more that enough for range of 0.001%(10ppm) and Higher concentration . i...
11 November 2019 2,507 1 View
Does the advanced mammography have the ability to change the type of the used filter according to the type of the breast density (dense or non-dense) in one machine today? Can this property...
07 November 2019 6,795 3 View
Hello, I have a big mesh model from point cloud data and i want it to convert into solid model for simulation. I am using mesh mixer but conversion failed due to a very big model. Could you...
04 November 2019 8,372 1 View
I want to know how to tune the PI controller in case of parameter estimation, let say i have equation Ls=[Kp+Ki/2]*[VdEd+VqEq] so how to estimate Kp and Ki value for better performance of the...
01 November 2019 3,855 4 View
Hi, I'm trying to design a reduced scale model of a turbine tested with glycerol. The prototype idea is to install a turbine in tailings flux to recover a percentaje of energy from it. The...
23 October 2019 9,349 3 View
Does anybody know where I could find detailed information on Chinese mechanization of artisanal, small-scale mining of gold in Ghana? And could anybody recommend some literature or researches on...
17 October 2019 2,831 1 View
I'm looking for Cold isostatic pressing machine in UK
12 October 2019 1,946 2 View
Hi! I run my samples in qPCR and then I label them once the results are done (I prefer to spend time on that when I am going to analyse my results). Should I label before the qPCR machine? Does it...
26 September 2019 2,668 3 View
Hi everyone, we are looking into buying our first qPCR (most likely the Thermo Fisher QuantStudio 3 or 5 system) and would like to be able to estimate our running costs in advance. We are a small...
26 September 2019 8,830 3 View
Hello, One of our clients is asking to collect the stormwater into ponds, then to treat it to be able to inject in groundwater. Since the rainfall is seasonal the treatment plant will be sized to...
17 September 2019 9,471 4 View
I have to weld a fiber optical strain sensor (FOS) to a detail which is maded from titanium alloy Ti -4Al-1,5Mn. FOS base is maded from stainless steel grade 302 ful hard. I use a capacitor...
15 September 2019 4,793 2 View
Artificial intelligence for medicine needs a Turing test. The test suggests that if a machine can answer any question presented to it using the same words that an ordinary person would, then we...
12 September 2019 6,656 2 View
Hello, Iam trying to design and construct a drop weight impact testing machine. So I need some information about the Impactor properties. How can I select the Impactor diameter and the...
05 September 2019 8,139 1 View
I'm trying to control the rotor speed of an induction machine using indirect rotor flux orientation of vector control. I am using a Recurrent Neural Network trained with Extended Kalman filter...
01 September 2019 484 5 View
In Chennai where micro tensile testing machine available
20 August 2019 4,039 2 View
So we have been looking at the relative expression of mRNA for an endogenous opioid in 3 different brain regions of our mice using qPCR. For each brain region we want to run two replicate plates...
08 August 2019 956 1 View
Is it possible to machine elastomer using abrasive water jet machining?
08 August 2019 5,775 7 View
Deal all, I am conducting a numerical analysis of machine foundation resting on soil. It would be very helpful if someone can provide me a reference stating the lowest and highest applicable...
31 July 2019 7,424 3 View
I am new to the Shimadzu GCMS-QP2010 Ultra. The machine passed a system check report, and then I tried testing acetone injection with a DB-5 column. After ~2-3 minutes, when the column temperature...
31 July 2019 8,504 3 View
As part of my project, I have a recorded lipid profile reading of TC ~6.2 HDL ~1.5 LDL - too low to register TG - too low to register non-HDL ~4.3 This was after an overnight fast in a healthy...
23 July 2019 793 12 View
Hello, I have two ITO targets. I'm planning to use ITO + Cu + ITO sputtering. Could I use ITO target for copper deposition? Normally I put copper side on the sputtering machine, and ITO will be...
23 July 2019 3,451 3 View
Most of us are using indigenoud bCPAP since long time in resource poor setting. We also know that itz very useful in this scenario. But are there any meta analysis comparing it with machine CPAP??
22 July 2019 8,233 3 View
Onion harvesting is not mechanized in Iran. I am searching for the best harvesting machines of onion. Would you share me your opinions?
16 July 2019 3,785 6 View