Review and cite MACHINES protocol, troubleshooting and other methodology information | Contact experts in MACHINES to get answers
13,956 views 793 posts
Questions related to Machines
Needed tips or tricks on patient data anonymization in Optos machine for a clinical trial. I tried to anonymize the patient data in OptosAdvance, but I still see the patient name and DOB in DICOM...
09 July 2021 1,106 1 View
Hi All, I am interested in fatigue testing of Al alloys in the gyga-cycle regime. If I use high frequency (up to 300 Hz), will I have faster localization of damage and lower fatigue strength...
03 July 2021 6,271 31 View
Computational modelling Machine learning-Artificial neural networks ,Support vector machine etc
23 June 2021 5,510 3 View
I tested 20 positive specimens with 2 different test kits and 2 different machines. what statistical method should I use to show that there is no significant difference between the 2...
22 June 2021 6,239 2 View
while running the model twonerrors were shown 1.port width mismatch(input of FIS block expects signal of size 2.it recieved is of sizze 1) 2.error occured in 'Evaluate Rule Antecendents' of Fuzzy...
16 June 2021 9,228 2 View
Hello everyone, Actually, we need to repeat the same experimental tests that used in Matthieu Gresil's paper by using( HP AGILENT 4194A) impedance analyzer, but the problem is we don't have...
12 June 2021 3,103 4 View
Our lab has the opportunity to upgrade the Abi 3130 to the 3500 Dx , and we want to know if the verifiler express is compatible with this machine
10 June 2021 3,117 2 View
I have a machine that includes a workpiece which can be considered as 1200 degree Celcius and it is rotating around its center. I have around 2.5 million mesh and the minimum orthogonal quality is...
09 June 2021 6,781 3 View
Hello, I need to measure a concentration of copper using a colorimetric Kit. My machine is a VICTORX3. I received as information, measuring range : 0.1-600 mg/L, cells 10 mm, wavelength 605 nm...
08 June 2021 3,199 1 View
I am blending PBAT and PLA using extrusion machine. However, the PLA/PBAT blended pellets start to agglomerate, and fail to pass along the screw, as soon as I introduce the pellets in extrusion...
06 June 2021 2,959 11 View
We are about to purchashe an osmometer for our lab, but we have to decide between a Wescor 5600 (vapor pressure osmometer) and a Gonothec Cryoscopic osmometer OSMOMAT 3000. I have only used Wescor...
31 May 2021 2,676 5 View
Hello all, I have been trying to quantify a 292 bp in my community DNA. In order to quantify it, I am using absolute quantification approach. I amplified the gene (292bp), purified it (ratio...
28 May 2021 8,242 2 View
I modeled a 5-story frame with 3 bays in these two softwares, and periods 1.15 and 1.09 sec were obtained in SAP and Opensees, respectively.(The period of the first mode of the structure)
28 May 2021 3,031 0 View
Dear All, I ran the TaqMan hPSC Scorecard Panel on BioRad CFX384, but the analysis application on ThermoFisher website is not accepting the output files. I tried converting them, but with no luck....
27 May 2021 9,370 4 View
Please suggest a machine/method to crush/grind solid materials (dry) in different mesh size...
25 May 2021 5,385 3 View
We have a number of (AC/DC) welding machines for submerged arc welding. In high ampere currents we have a extreme current fluctuation that result in some welding defects.
19 May 2021 3,059 4 View
In my study area, water quality data is scary at some period because we don't have automatic machine. But I wish to use limit data to analysis concentration-discharge hysteresis and normalized...
18 May 2021 1,041 2 View
I am looking for a machine that is able to do single gene sequencing of genes in plasmids (
13 May 2021 4,932 3 View
Who can share some recording of the loading processes?
08 May 2021 3,773 3 View
I wish to study air pollution in Nepal. Which one is better? Taking average of PM2.5 and PM10 from different stations OR studying air pollution indicators at each stations of a city ?
04 May 2021 6,428 10 View
The universal testing machine which we use for metals can we use the same for polymers as well if so, please mention any parameters if not what other machines are suggested thank you very much...
12 April 2021 4,843 1 View
Olive tree leaves start wilting, leaf rolling
12 April 2021 8,667 8 View
The Xenon lamp in our lab's qPCR machine has just past its max number of usage hours. It is now at 1004 hours, but the maximum set by Roche is 1000. I have ordered a replacement lamp, but this...
09 April 2021 7,585 2 View
The behavior of electrical circuits can be elegantly modeled as time-invariant systems (LTI systems). In electrical circuits, we are interested in knowing how the system behaves in time. On the...
24 March 2021 7,814 0 View