Review and cite MACHINES protocol, troubleshooting and other methodology information | Contact experts in MACHINES to get answers
1,453 views 408 posts
Questions related to Machines
Which tools can be used to generate machine codes for additive manufacturing?
02 March 2021 7,334 2 View
Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...
02 March 2021 2,587 3 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,600 3 View
I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...
22 February 2021 4,379 1 View
Dear all, I hope everyone is safe and healthy I do have a question please. Where can I find a drop-weight impact testing machine to test fiber reinforced polymer composite plates (CFRP and GFRP)...
17 February 2021 3,917 3 View
Hi, I want the use lithium niobate for the frequency conversion from 1030nm to 515nm. We want to order bulk material and machine it to the required dimensions. There are numerous suppliers of...
07 February 2021 6,851 2 View
Hi everybody, currently, I am working on the grid-connected inverter. I want to make my grid-connected PV system a PLL-less system. I have studied some reachers are implementing a virtual...
07 February 2021 6,170 2 View
Hi all, we are looking to buy a photosynthesis meter that can potentially measure photosynthetic rate, stomatal conductance, CO2 assimilation, PS1 and PSII efficiency (if possible), etc. it would...
02 February 2021 5,301 3 View
I'm working on my dissertation and it is about how to save energy when a CNC machine goes to idle mode. (A concept model of the idle machine energy saving in industrial manufacturing...
26 January 2021 9,705 5 View
what is the best geophysical machine or device for detecting groundwater? Are there any machine that can detect the depth and the type of water? do I have to buy one machine or more than one to...
26 January 2021 6,213 15 View
Hello! i´m trying to use the biodot zx1010 to make the test and control line on a lateral flow strip but the manual that came to our machine it isn´t the right one, and doesn´t have much...
25 January 2021 6,370 1 View
hello, in fact I encountered problems during the simulation of the fuzzy regulator applied to the asynchronous machine. I replaced the PI regulator of the vector control with the fuzzy regulator,...
12 January 2021 6,205 3 View
Hi, I am wondering if anyone has done HRM using Stratagene qPCR machines and Thermo Fisher Applied Biosystem MeltDoctor™ HRM Master Mix? I am aware that the Stratagene qPCR machines are not...
27 December 2020 939 4 View
I require the machine (generator) data for H, Rs, Xd, Xtd, Xq, Xtq, Td0, Tq0 and D; as well as the exciter data (kA, TA, kE, TE, kF and TF). If you can share the machine data file or link, it will...
22 December 2020 2,455 3 View
I‘ve been working on western blots using the Protein Simple Wes machine and have had good success with it. Although recently I had to move to another lab that has also has a Simple Wes machine,...
03 December 2020 9,041 4 View
da
02 December 2020 8,649 1 View
Since the ladder sleeper consists of two longitudinal beams along the railway track, a conventional tamping machine is not applicable for ladder tracks.
26 November 2020 3,240 1 View
It is possible to notice, at some three phase induction machine datasheets, that exists a relationship between stator leakeage reactance and slip, that is, the stator leakage reactance increases...
23 November 2020 3,041 3 View
Why thermally evaporated (VCM 600 V1 configuration of the thermal evaporator) CdTe film found n-type not p-type conductivity whereas all CdTe films deposited by varying the source to substrate...
23 November 2020 7,501 3 View
At the cross-roads of Technology for Advanced Manufacturing, involving robots and humans, and Digitised Economic Sectors, is a governance matter for Cognitive Manufacturing [1] and rules of the...
21 November 2020 7,229 20 View
Hi there, In low frequency railways it is common with single-phase synchronous machines. Anyone that knows how to model them dynamically in a trustworhy manner? Moreover, there are many...
18 November 2020 1,428 5 View
Dear researchers we are using FRITSCH Pulverisette 6 - MONO planetary ball MILL. In the machine dashboard we can set the rotation rpm of milling. This rotation speed that we are setting is for...
17 November 2020 5,051 2 View
We are looking for a 3D printer for research purpose.
11 November 2020 2,172 9 View
We conducted a field trail, where a harvesting machine repeatedly passed numerous study plots (randomly located in a forest stand). After each pass, rut depth increment was measured. Number of...
08 November 2020 4,306 3 View