Contact experts in ANSYS to get answers
7,066 views 4,162 posts
Questions related to ANSYS
How much thickness of cracks(Shrinkage or any other plastic cracks) are acceptable in concrete?
15 August 2023 9,653 3 View
Dear Researchers. I did phonon calculations and I am interested in plotting phonon displacement vectors, Does anyone have any idea about this plotting?
09 August 2023 6,581 2 View
Tg vs stiffness and elastic modulus
21 July 2023 9,488 1 View
Dear all, I would like to convert a published metabolite content in rice leaves from mg/g FW to mg/g DW, I would like to know if there is a general conversion factor for this. Thanks
21 July 2023 10,096 4 View
Hi, I am trying to export elemental stiffness matrix from Abaqus by adding the following lines in the input file "*Element Matrix Output, Elset=Set-1, File Name=myMatrix, Frequency=1, Output...
18 July 2023 7,402 4 View
I am trying to use Tld as overhead water tank. There are previous studies in this particular area of interest but no one has used numerical modeling, most of the research is experiment oriented.
08 July 2023 8,493 0 View
Colleagues, good afternoon! The task is to separate non-monodispersed colloidal particles of silicon dioxide by size using the density gradient centrifugation method. The experimental data...
04 July 2023 7,443 1 View
Gravitational waves that are detected by the current detectors are of long wavelengths and are hence low on energy, but during the initial phase of the universe high energetic phenomena like...
04 July 2023 3,241 3 View
here is my program: real a(2,240) integer i,j if (TIME(2).EQ.0) then !读入温度数据 open(12,file='temperature.txt') do i=1,240 read(12,*) a(:,i)...
03 July 2023 1,433 3 View
Hello! Not so long ago I started using Mechanical APDL to solve thermal conductivity problems and I had one question. I am modeling a two-dimensional temperature field on a slice of a multi-chip...
03 June 2023 6,654 0 View
What cycles exist in nature and how are they important for the environment and carbon cycle so important to nature and the functioning of ecosystems?
02 June 2023 5,355 1 View
i am currently working on microbial fuel cells generating electricity from waste. my work is to determine the best concentrations for waste and substrate for optimum power production and to...
22 May 2023 7,412 1 View
It needs correction
21 May 2023 8,421 1 View
In some cases, it is difficult for a decision-maker to express an explicit approximation of the preference function. Therefore, it can be effective to allow the decision-maker to choose from a...
18 May 2023 7,589 0 View
Hi all, I've ran some stds for NH3 using an auto analyzer, but the results are not good. I followed SKALAR (brand of the machine) protocol as well as the one from SEAL, however both results are...
15 May 2023 3,226 0 View
I need to design an eddy current test probe for inspection of ferromagnetic test piece. I have come across a sample solution that solves for Eigenfrequency of a PCB coil in COMSOL. I needed to...
27 April 2023 264 1 View
the diagrammatic representation of the articulators while saying: being stressed by more and hustlers.
27 April 2023 6,513 0 View
Hello research community I have been stuck in the process of simulating the deformation that would occur in the collision of two specific objects in a given scenario. But I have only obtained a...
13 April 2023 8,582 3 View
When the pore part elements were not removed (A model), the results were very close to the analytical formulas. However, when the pore part elements were removed (B model), the mechanical...
03 April 2023 5,342 3 View
Hello all I am simulating flow over a sphere at Re = 881 where Drag coefficient must be almost Cd=0.5. I simulate it using both using laminar and Turbulent models(KOmegaSST). for laminar...
12 March 2023 9,426 3 View
I could not find the necessary information on the PEER site. None of the seismological stations of Turkey in the recent earthquakes are exist on this site. Like Pazarcık (Kahramanmaraş) station by...
11 March 2023 3,913 2 View
I've worked on the residual stress part of the model, have to calibrate my model for eigenstrains. Do share your valuable inputs.
10 March 2023 2,305 1 View
Is there a possibility to display the mechanical compliance of a structure in Ansys? If this is only possible with APDL, does anyone have a script that does this?
02 March 2023 4,582 0 View
Modern research recommends that researchers apply the Mixed Method Research Approach to developmental research studies. This is both Quantitative and Qualitative data that have to be collected...
02 March 2023 933 2 View