Contact experts in ANSYS to get answers
4,917 views 3,535 posts
Questions related to ANSYS
It must have high thermal conductivity even if it is not electrically conductive. However, it should had high stiffness value so that it will not warping
02 October 2022 520 1 View
Over the next years or so, electric vehicles entered most of the country market with some advanced technology. Can traditional engine such as Gasoline SI engine and Diesel CI engine and their...
01 October 2022 8,254 7 View
Hello I am working on a single objective problem with some constraints (I have added them as nonlinear constraints). I tested gamultiobj for this problem and got almost reasonable results, but...
28 September 2022 5,408 2 View
Hi, we are testing neat PVA membranes in pervaporation for ethanol dehydration. What we are observing is that it's not pervaporation happening there, in fact, it's simple permeation as the...
27 September 2022 6,172 0 View
I am trying to simulate laser drilling I have put the following equation for heat flux. I have attached the screenshot of the solution that I got. It doesn't show me any temperature profile. I...
17 August 2022 805 0 View
I am doing ANSYS Maxwell simulation of Taylors cone with different materials such as PTFE, PEEK and Silicon. The electrostatic fluid used is EMI-BF4 which modelled as cylinder with Cone on top of...
28 July 2022 830 2 View
Suppose there are 200 buildings in an area. We define the construction age of each of the buildings as old, moderate and new. If I pick any building from the 200 buildings, what is the probability...
13 July 2022 514 2 View
I am working on a project involving analysing liquid cooling structures of electric vehicle battery packs, and am currently trying to roughly model the heat generation of an 18650 cylindrical...
10 July 2022 3,510 0 View
Hi all, I have modeled an arch (BEAM188) which ends are supported by springs(COMBIN14). The arch is modeled between key points K#1 & K#2. One spring is connected between the key points K#1...
30 June 2022 6,985 1 View
Dear colleagues in System Engineering and Automatic Control: I used to apply classic controller on industrial processes such as PID controllers Do you have an idea about what are the recent and...
25 June 2022 8,197 6 View
I am working on CFD simulations and analysis of a diffuser turbocharger compressor for a typical engine passenger car. Also, I have worked on a Engine Performance model excel file to calculate the...
19 June 2022 2,205 0 View
Hello, We are two students trying to model a fracture in a hyperelastic material in COMSOL, trying to make it similar to a set of experiment data we've received. We have figured out the...
14 June 2022 9,378 0 View
How to get the frequency response in terms of voltage from the piezoelectric patch using the ANSYS workbench? Like in this paper, https://www.mdpi.com/1996-1073/12/14/2770
06 June 2022 543 2 View
I have a problem in performing load mapping from ansys aqwa to structure for a cylinder has internal line bodies as a stiffener as in figure ,when I suppress the line bodies ,mapping is done...
11 May 2022 4,107 0 View
What kind of theories or models is able to apply to safety investigation in a field of social care services? There is serious "never event" incidences in social care as well (e.g. delayed child...
19 April 2022 6,155 17 View
I am trying to investigate the effect of sloshing water on structures, So I need a curve like that to show my results How to get this from ansys using system coupling ?
07 April 2022 2,165 0 View
There are contradictory recommendations in this regard. Any authentic guidelines please?
27 March 2022 5,535 10 View
I'm going to simulate 2D Airfoil Aeroelasticity in Star-CCM+. I faced a problem that I can't use torsional and linear spring simultaneously. Does anyone know to do that?
26 March 2022 135 0 View
Does anyone know of a way to link MATLAB with PLS-TOWER from Power Line Systems? Seeing as how the software is the industry standard when it comes to structural analysis (especially truss...
08 March 2022 4,973 0 View
Performing the Charpy impact test for un notched composite specimens. Can anybody explain the difference between un notched and notched specimen importance during Charpy test. Can we use unnotched...
26 February 2022 9,776 1 View
Hello, what equation can you suggest to convert the absorbance reading on the spectrophotometer gotten from the quantitative estimation of bioethanol via acidified dichromate method to g/L
11 February 2022 7,408 3 View
All tutorials I get encountered with the analysis of reinforced concrete beams always apply "displacement" ONLY as boundary conditions .. that makes it easy to verify that the model is solved...
04 February 2022 5,798 2 View
Hello everyone, I am trying to do an optimization of an axial flow pump using ANSYS. the optimization flowchart in ANSYS Workbench is shown in the figure below. the problem I am facing is how to...
27 January 2022 2,844 2 View
I want to study the response of a quarter car vehicle suspension model to random road profiles (such as class C road) . How to generate a random road profile using simulink?
27 January 2022 5,438 3 View