How to find gain and directivity?

More Mohan Narasimman's questions See All

How do regenerate Amberlite XAD 4 resin for further cycles of use for removing 0.5% Sarkosyl from recombinant protein solutions?

I use 0.5% sarkosyl to solubilise recombinant proteins contained in Inclusion bodies of E. coli. sarkosyl very effeciently solubilizes proteins from Inclusion bodies and I am trying to use...

25 July 2024 5,001 2 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

How to troubleshoot the Milliplex Cytokine assay, when I see >OOR/<OOR in my data?

I am conducting cytokine measurements using a multiplex assay. Some of the proteins are yielding results that fall outside the standard curve values, either below (< OOR) or above (> OOR)....

24 June 2024 9,717 0 View

How can formulate Phosphorus 52 and Potassium 34 in liquid ?

formulate Phosphorus 52 and Potassium 34 in liquid

03 June 2024 7,589 2 View

"Range chek error" problem in DSSAT Model?

I was previously using the DSSAT version 4.7 in my PC. Now, I have installed the DSSAT v4.8. Whenever I am trying to simulate the experient is shows "Range chek error". This problem exist even...

13 May 2024 5,894 0 View

I am trying to do X ray peak broadening analysis of nanosheets. How important it is to strip the K-alpha 2 for accurate results?

The stress-strain calculations, energy density GI index calculations are also being done.

02 May 2024 9,963 4 View

How have solitons been interpreted in the protein folding mechanism?

One and two soliton solutions have been obtained while considering the protein folding mechanism of Davydov solitons. What are the dynamics of these soliton solutions that can be obtained in...

25 April 2024 5,241 0 View

Has anyone designed guideRNA for multiple targets using polycistronic-tRNA-gRNA expression system?

I am planning to design guideRNA for multiple targets to express as a polycistronic-tRNA-gRNA expression. I would like to know whether we need to include any linker between the tRNA and guideRNA...

29 March 2024 1,055 0 View

In RG 80 Nobel Prize Winners are listed ,Can we know their area of research and institute of affiliation with country ?

The answer help young researchers get motivated

19 March 2024 3,204 1 View

How to make 10% Boron solution , which content 10% elemental Boron value ?

Procedure for the preparation of 10% Boron liquid.

20 December 2023 9,622 2 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

Tangential stiffness option in ansys workbench?

I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...

29 July 2024 2,032 2 View

Has anyone looked into the stability of FEM methods on curved meshed?

Google scholar isn't giving me any results on this

27 July 2024 595 2 View

How to Import Blade geometry from CAD file in ANSYS design modeler?

Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...

27 July 2024 356 3 View

Is it possible to do transient simulation in HFSS in presence of magnetic biasing?

I have designed magnetic material with different biasing conditions in HFSS. Now I want to give an RF AC signal and do a transient simulation in HFSS. Is it possible to do in HFSS? Please help me...

24 July 2024 9,319 5 View

How can I decrease the error of Rietveld method for phase quantification?

Phase quantification in steel contain BCC and FCC

20 July 2024 8,150 7 View

Can someone help with the instrument configuration in Profex using Rietveld Refinement?

I am trying to configure the instrument in Profex but I can't get a chi-squared value below 9.65 for LaB6. This is the configuration of the equipment, which is a Bruker D8 Advance with a Linxeye...

14 July 2024 4,767 1 View

Anyone working in Model updating technique using FEM?

I am trying to model RCC beam with induced corrosion. How to model this beam using model updating technique.

14 July 2024 3,536 3 View

Amr Al-Awamry

Directivity and gain are similar the main difference is losses (efficiency of antenna )

Gain = eff*Directivity

also Gain and directivity are functions of Theta , so you have a function not certain unique value ,

Gmax or Dmax is the Max. value of the function of D(Theta),G(theta)

Mohan Narasimman

thank you for your reply sir,

what about gain and directivity Vs frequency? can i find my max gain of an antenna from the frequency?

El Ouadih Abdelhakim

of course because in the HFSS tree you define the curve or the results table you want. you define the abscisses and the ordonnees.