Contact experts in Nanocomposites to get answers
1,116 views 673 posts
Questions related to Nanocomposites
How it will be different from FTIR analysis and EDX??
17 May 2017 4,676 3 View
Research related answer discussing the rheological properties of a solution containing both surfactant and hybrid NPs, and compare with that of surfactant solution.
17 May 2017 719 1 View
Resin content of a composite is often measured using microscopy. Is there a study on comparing results of resin content using microscopy as opposed to TGA?
16 May 2017 646 4 View
I need a simple windows based program software that could be find peaks in a tow dimensional diagrams ? Or I will be thanks every body that could be identify me professional software for Raman...
15 May 2017 9,848 1 View
The results of the photodegradation activity measurement demonstrated that increasing in weight ratio of MWCNT and SWCNT to TiO2 from 1% to 10% , enhanced the MG photodegradation.
14 May 2017 446 2 View
I'm questing for green synthesis of biocompatible NPs, but I don't know about the bio-compatibility range of Cu, Ag, Fe NPs. How one can say that Ag NPs is bio-compatible though? Is there is some...
14 May 2017 7,597 3 View
I have done XRD analysis on two samples. The intensity for one sample I am getting more for montmorillonite mineral. What wiil I interprete, either the concentration of montmorillonite is more or...
13 May 2017 647 2 View
i work in a composite with zno
12 May 2017 9,771 1 View
aminated cellulose is a type of NFC (nano fiber cellulose) which its surface is modified by amin
12 May 2017 4,538 3 View
I am working on piezoelectric ceramic material. I want to know if the material is not densified completely (densification is less than 90%) then how it will be effect during poling or during...
10 May 2017 2,615 3 View
I am synthesizing a nano composite. Will IR data give any quantitative information in regards of the filler concentration? Do peak area plays any role in contrast with the concentration?
09 May 2017 7,985 6 View
Composite layer for fabrication of humidity sensor
09 May 2017 5,413 1 View
I just wanted some ideas as to what are the features of dispersing fumed silica or dispersing nano silica particles that are not fumed .Which ones are suitable for Hydrophobicity and scratch...
09 May 2017 8,957 1 View
Usually bandgap is calculated by taking UV-Vis measurements. For these measurements the sample need to disperse into suitable solvent. I need help that which solvent will be suitable for NiO...
05 May 2017 7,116 2 View
why the crystallinity of iron oxide nanopowder increased on calcination ? As prepared sample is showing less crystallinity than calcined one. why. what is happing actually? Any suitable paper?
05 May 2017 8,405 3 View
How can the surface area of powders (organic and inorganic) be determined? What should be the concerns and requirements: I mean the information do determine the surface area of these materials?...
05 May 2017 2,041 5 View
I am preparing a nanofluid having liquid gallium as my base fluid and other metalic and polymeric nano/micro particles to be suspended on it using a high power sonicator. I was wondering how can I...
04 May 2017 2,212 4 View
Hi everyone, I am studying about the Bridge's arc method for preparation of colloids. Besides some advantages of this method, I'm thinking of its disavantages. So if someone has experiences in...
03 May 2017 5,294 1 View
how can wash graphene oxide and sonicate it that dont give Precipitate?
01 May 2017 4,002 3 View
I need JCPDS cards of these materials to analyse XRD results for my BS project.
28 April 2017 6,594 4 View
Dear Friends, currently I am facing a problem regarding the XRD of thermoplastic polyurethane (TPU)-reduced graphene oxide (RGO) nanocomposite. I have loaded 0.2 wt% reduced graphene oxide in TPU...
27 April 2017 7,013 1 View
In one fabrication procedure authors used sonication for dispersing carbon black, ptfe and ethanol. Our lab is not equipped with sonicator so can I use magnetic stirrer for the purpose and what...
27 April 2017 6,077 10 View
I have used melt blending to prepare a nanocomposite. Cryomicrotome can be used to make a flat surface on a compression molded sample, but it is an expensive method. I need an easy and low cost...
27 April 2017 4,762 2 View
i am trying to measure in four probe method for resitivity and band gap. how to prepare our samples for four probe technique.
26 April 2017 2,027 1 View