Contact experts in Nanocomposites to get answers
3,004 views 1,020 posts
Questions related to Nanocomposites
We have been attempting to sinter conductive silver ink onto a glass substrate using laser ablation. So we want to know if there are any pre-treatment methods which can enhance the quality of the...
20 August 2019 9,738 8 View
I am trying to see if it is possible to evaporate CNCs on to gibbsite nanoplatelets to form a multiylayer thin film. However, I am worried that the CNCs will decompose before even reaching the...
22 July 2019 4,284 2 View
If I sonicate nanoclay epoxy mixture and don't use it for say 30 minutes, provided it is well below the pot life of epoxy and hardener, will it cause the deagglomerated and dispersed nanoclay to...
17 July 2019 9,508 2 View
I am working on nanocomposites of metal oxides synthesis. What all application can we study related to electrochemical studies
02 July 2019 7,648 3 View
I synthesis nano particles with and without graphene oxide...I use graphene oxide as a electron mediator...and I didn't have expect that adding graphene oxide have obvious effect on band gap value...
24 June 2019 7,855 6 View
I synthesised polypyrrole/Au nanocomposite . I used Hcl as an oxidant. Now I want to hydrophilise it. plz help me
16 June 2019 8,454 2 View
We are trying to measure the d33 coefficient of a large organic crystals and I was wondering whether or not PFM would be the method to go for. I see that generally thin films of the samples are...
31 May 2019 7,021 7 View
I am an undergraduate who is trying to synthesize mesoporous particles by mixing several compounds. Something is wrong with the experiment, I need advice. Briefly, there is a problem in changing...
29 May 2019 9,556 3 View
Sago starch is a high viscous fluid. Can anyone please suggest me the actual viscosity of sago starch with SI unit and how can I reduce the viscosity of sago starch? please.
03 May 2019 332 2 View
Biopolymers can bring in an environmentally benign approach to nanocomposites.
30 April 2019 8,214 6 View
Dear colleagues We prepared a p/n nanocomposite based on GO, TiO2 and Co/Ni. How to check the stability of the new CB/VB ? and what is the effect of changing the nanoparticles ratio on the...
21 April 2019 3,104 1 View
I want to do numerical analysis for electrical properties of cement-CNTs nano composites. Which software is suitable for same?
18 April 2019 6,058 6 View
I have recently synthesized PDMS-Graphene based nanocomposite film. In this experiment, I have mixed commercial graphene flakes with PDMS following the standard procedures. At the very end, I...
17 April 2019 5,948 4 View
In the synthesis of clay-polymer nanocomposites (CPN) we need to increase the interlayer of the clay and our purpose is to identify the suitable MMT for this process.
14 April 2019 910 2 View
I want to study the negative normal stress difference that arises in a filler-polymer nanocomposite hydrogel such as in Graphene oxide-PDMS suspension. Can someone please describe the method to...
06 April 2019 1,091 1 View
Hi all, I'm trying to make conductive nanocomposite by mixing poly acrylated urethane based adhesive (DYMAX203A) with AgNP (
04 April 2019 3,732 3 View
Why "in some cases" does toughness of polymer-filler nanocomposites reduces with increased tensile strenght? knowing that this trend is quasi-linear with an increased filler content.
24 March 2019 4,549 4 View
Is there any method (green one) to produce SrCO3@NiO nanocomposites?
18 March 2019 6,721 4 View
I am planning to study the effect of thermal shocks [hot (50 degree celsius) for 2 hours followed with cold ( 20 degree celsius) 2 hours] on the Nanoclay-epoxy composites. will repeat the same for...
18 March 2019 10,264 4 View
What is the reason of peak shifting in XRD towards lower side in case of nano composite of Tron @Titana than individual peaks of iron and titana
14 March 2019 8,656 3 View
Hi everyone, Do you know of literature describing focal adhesion morphology in response to poor cell adhesive surfaces? My HK-2 cells give small and plentiful focal adhesion on surfaces that...
22 February 2019 4,127 0 View
I am preparing pva/ chitosan nanocomposites pva/starch nanocomposites .So many paper i have seen both crooslinking agent like glutarldhyde , glyoxal and plactizers like gly cerol is used? both...
15 February 2019 593 7 View
I cannot coat a pin because it is too small. Can I coat a large specimen and use it as disc wherein pin would be the counter face.
12 February 2019 7,326 6 View
In FT-IR spectroscopy measurement for pure PEG8000 and PEG8000/1wt%GO nanocomposite films , why it gets slight shifted in peak location and change the relative intensity of the peaks?
08 February 2019 4,370 5 View