Contact experts in Nanocomposites to get answers
1,123 views 673 posts
Questions related to Nanocomposites
In order to analyze epoxy neat and nanocomposite coatings in SEM, AFM, etc. I need free or free-standing films. How do I produce them? Basically, if I coat the epoxy nanocomposite on a substrate,...
18 December 2019 3,471 5 View
I found air bubbles in the cured epoxy coatings. I do not have a vacuum oven, vacuum pump, thinky mixer, etc. in order to remove the entrapped air. I came to know that there are bubble release...
12 December 2019 281 3 View
I am trying to find out the effective properties (elastic, piezoelectric and dielectric coefficient ) of the nanocomposite. My unit cell consists of a sphere (piezoelectric nanoparticle-...
11 December 2019 326 3 View
I have prepared MgO nanocomposite in powder form . I want to check its electrocatalytic properties but I have no expertise in making electrodes as it is also not my guide's field. Is there any...
11 December 2019 10,116 3 View
Kindly give the information about the instrument which can be measuring the depth of the micro scratch /dent on the polished surface?
05 December 2019 5,266 2 View
After preparing epoxy clay nanocomposite using the solution intercalation method, how can the solvent be removed? I do not have a vacuum oven, vacuum pump, degassing equipment, etc. Are there any...
30 November 2019 4,176 2 View
Application: to peel out epoxy coating from mild steel or glass substrate Basically I am going to apply epoxy coating on a substrate. But since I want to peel out the coating for further AFM/SEM...
21 November 2019 5,157 1 View
Hello, What is the relation between dielectric constant of the plasmonic material and the magnetization of magnetic materail in magnetic-plasmonic nanocomposite or structure.
15 November 2019 7,658 2 View
Dear All, I am working on research related to fabrication of glucose biosensor by using screen printed carbon electrodes (SPCE). I modified the working electrode with nanocomposite and then...
04 November 2019 5,492 3 View
Can steel pin of the pin on disk tribometer setup be used in doing wear rate testing of sintered Alumina??
08 October 2019 3,910 6 View
Hi everyone, The purpose is doping polymer with Magnetic Nanopariticles for making a final nanocomposite material. Is there any suggestions what is the best technique that can be used to check the...
04 October 2019 7,547 3 View
Hi, I have a glass column packed with Sephadex-G25 and onther with Superdex-S200. I would like to store it in this way (packed) for a long time at 4 ºC. The manufacturer recommends using 20%...
01 October 2019 3,342 0 View
I planned to make use of nanofillers in my PVDF based nanocomposites. There are so many nanofillers available,but I'm confused. Kindly tell.
26 September 2019 6,359 1 View
I am working on a project of zinc based nano composite material. Anyone guide me how to prepare zinc carbide.? What is the required temp. To mix zinc carbide by mechanical stirr casting.
20 September 2019 9,079 3 View
Hi all, I'm trying to use silver nanocomposite(Ag nanoparticle + acrylated polyurethane based resin) as a electrode for electrochemical sensing. So far, our team has used Potassium Ferricyanide...
18 September 2019 9,471 1 View
Hi all, I'm trying to make conductive microstructure with silver nanocomposite, and aiming to use it as an electrochemical electrode. In detail, the nanocomposite consists of silver nanoparticle...
25 August 2019 320 4 View
I am trying to see if it is possible to evaporate CNCs on to gibbsite nanoplatelets to form a multiylayer thin film. However, I am worried that the CNCs will decompose before even reaching the...
22 July 2019 4,153 2 View
If I sonicate nanoclay epoxy mixture and don't use it for say 30 minutes, provided it is well below the pot life of epoxy and hardener, will it cause the deagglomerated and dispersed nanoclay to...
17 July 2019 9,355 2 View
I am working on nanocomposites of metal oxides synthesis. What all application can we study related to electrochemical studies
02 July 2019 7,526 3 View
I synthesis nano particles with and without graphene oxide...I use graphene oxide as a electron mediator...and I didn't have expect that adding graphene oxide have obvious effect on band gap value...
24 June 2019 7,736 6 View
I synthesised polypyrrole/Au nanocomposite . I used Hcl as an oxidant. Now I want to hydrophilise it. plz help me
16 June 2019 8,337 2 View
Biopolymers can bring in an environmentally benign approach to nanocomposites.
30 April 2019 8,030 6 View
Dear colleagues We prepared a p/n nanocomposite based on GO, TiO2 and Co/Ni. How to check the stability of the new CB/VB ? and what is the effect of changing the nanoparticles ratio on the...
21 April 2019 2,991 1 View
I want to do numerical analysis for electrical properties of cement-CNTs nano composites. Which software is suitable for same?
18 April 2019 5,916 6 View