Contact experts in Liquids to get answers
2,836 views 602 posts
Questions related to Liquids
I have liquid guiacol and beed to prepare 10mM of this solution
01 September 2019 6,646 3 View
Is it possible to grow different bacteria in a fermenter/chemostat under common conditions? I have a panel of bacteria, some anaerobic, some microaerophilic, some requires Columbia blood agar,...
21 August 2019 2,564 8 View
To check either the methane gas get converted into any kind of stable compound like solid or liquid form.
18 August 2019 6,227 1 View
detailed description of the process
13 August 2019 4,510 3 View
I have done non catalytic supercritical water gasification experiments, and in order to have a better energy-economic analysis in my experiments, i have calculated physical and chemical exergy of...
13 August 2019 6,263 4 View
Hello Everyone, This is regarding the EFL change of a biconvex lens. Can someone explain to me the reason for a change in the measurement of a boconvex lens in water when measured with a time gap...
08 August 2019 7,744 1 View
As both are liquids and Acetic acid is solute then how to make their 1.5 molar solution?
06 August 2019 8,836 2 View
i wish to formulate trichoderma spore in talqa powder and liquid form. any one please suggest me ?
05 August 2019 4,314 3 View
Hi. I'm trying to make LIS(Liquid Impregnated Surfaces) using PET film, so I was looking for the appropriate film product. Then I found biaxially oriented PET film, and I want to know if there is...
23 July 2019 434 1 View
Hi all I am trying to get a known standard of methanol-air mixture which is saturated at room temperature. In my experiment trials using 125ml gas bubbler with methanol pool of 50 ml, I get...
23 July 2019 6,858 2 View
TDR can be used to measure non-aqueous liquids in saturated soils, why not to measure aqueous liquids in unsaturated soils.
22 July 2019 3,012 1 View
How can i fit for BET adsorption isotherm for liquid phase on origin? I tried Langmuir , freudlich and temkin model but none fit, adjusted R2 was less than 0.9
07 July 2019 3,644 2 View
Aspen Plus provides the option to input the T dependent liquid heat capacity parameters. Although the option exists for entering parameters for following equations: IKCAPE TDE ThermoML Barin But...
06 July 2019 8,999 1 View
Liquid Desiccant air dehumidification System Design with regeneration
25 June 2019 2,467 1 View
Hello, I am collecting plant leaf and stem samples for RNA extraction for my RT-qPCR experiment. I snap freeze the samples/tissues in 2.0/1.7mL Eppendorf tubes in liquid nitrogen. During transfer...
04 June 2019 3,250 4 View
I inoculated a WT Saccharomyces serevisiae strain in liquid minimal media at 30 C, 250 rpm. I meassured the OD600 every 20 min and after a ´normal´ increase in OD, the OD suddenly drops. Does...
04 June 2019 6,912 2 View
Normally, I have seen the commercial temperature sensors of probe type are used for microfluidic or organ on chip platforms. I am looking for any paper in which temperature sensor is reported to...
31 May 2019 7,396 4 View
How the sloshing of liquid will affect space mission?,will it help or will it have any adverse effect on mission
30 May 2019 5,489 1 View
Im trying to synthesize imine base from salycilaldehyde and naphtylamine using ethyl lactate as solvent.. everytime I tested them on TLC, naphtylamine always show under UV light, and they say...
20 May 2019 486 2 View
We don't access to liquid nitrogen. What is the most efficient way to transfer the fresh tissues newly isolated from animals for the long distance?
13 May 2019 5,276 3 View
It will save huge water and same can be used for gardening and flush etc .
13 May 2019 1,745 1 View
I am working to develop friction stir welding of Cu to SS and in this regard, I would like to know the mechanical and metallurgical properties of ETP Cu and 304L SS from room temperature to...
11 May 2019 9,032 2 View
I've measured three different ethanol samples in my IR spectrometer, whose spectra are attached (one in absorbance and another in transmittance units). The measurement was made with liquid ethanol...
09 May 2019 5,834 9 View
Eugenol (Sigma Aldrich, density = 1.067 g/ml) is in liquid form. I want to administer eugenol in Wistar rats i.p. in various mg/kg bw doses. How can I convert ml into mg dose?
07 May 2019 3,776 2 View