Contact experts in Annealing to get answers
9,060 views 670 posts
Questions related to Annealing
I have Ni nanoparticles supported on carbon annealed at 500 C for 2h under the reducing atmosphere has shifted to 3 degree larger angle. Before annealing there was no shift in 2 theta is observed...
04 April 2018 9,607 4 View
Hi, In research papers, researchers mention the heating rates/cooling rates they used, for thermal annealing for formation of metal nanoislands (MNIs) after despostion of metal (using thermal...
04 April 2018 6,883 0 View
My question really is that at what temperature should the AMT be annelead to get pure WO3? Also the target is to get monoclinc WO3. Thank you in advance! I have attached the XRD pattern that we...
02 April 2018 1,317 2 View
I want to knon how the deformation twins disappear during the annealing.Can the Frank partial dislocation climb during annealing? whether the climb of Frank partial dislocation contributes to the...
03 March 2018 6,897 0 View
Hi everyone, We electrochemically deposited the cobalt oxide (Co3O4 or CoO)on carbon cloth. The cobalt oxide is deposited from the precursor of Co(NO3)2 and annealing in air. However, it can't...
03 March 2018 9,146 3 View
For a MnZn ferrite torroid ring, i have made field annealing in the Φ direction by winding the coils to create the circle field, OR, in the Z drection by put it in the gap of a magnetic path...
03 March 2018 3,817 1 View
I have deposited a thin layer of Zn on ordinary glass by vacuum evaporation, it is possible to do a doping during annealing in tubular furnace?
03 March 2018 1,822 6 View
Hello, As it mentioned in question, Is it possible to achieve poly-crystalline silicon from annealing the amorphous silicon? What would be the appropriate temperature and time? We have...
03 March 2018 890 0 View
I wanna know that, is "Annealing" step necessary for ALUMINIUM wire and cable manufacturing? Do factories usually make this "Annealing" Step for manufacturing their Aluminium wire and cables?...
03 March 2018 4,307 10 View
How to set melting curve program ? Should we use the same temperature annealing of the cycling stage?
03 March 2018 855 1 View
polystyrene
03 March 2018 6,919 4 View
I have read some literature about the manufacturing of MgB2 by high energy milling of Mg and B. But, I could not find the exact reason why annealing or sintering is needed after high energy milling?
03 March 2018 3,089 2 View
I performed annealing operation on Aluminium 6061. I want to avoid manual testing. If anyone had done it and would be able to tell it then it would be great?
20 February 2018 3,086 2 View
My RT primers have suggested annealing temperature of 42 degree celsius. I tried normal PCR with this annealing temperature and it showed considerable bands. Now, while running it on Real Time PCR...
02 February 2018 4,927 7 View
Does anyone knows a reference book that describes this phenomena? Are flow lines and shear bands the same or they're different from each other? why flow lines appear in micro structure? (Attached...
02 February 2018 3,448 0 View
Which boundary in fcc has higher free energy: annealing or deformation twin? Any literature reference is highly appreciated.
02 February 2018 3,890 3 View
I wish to find a proper way to reduce the gate leakage current.
02 February 2018 2,616 0 View
I have been searching for literature on this subject, but apparently much of the Accumulative Roll Bonding work has been performed on conventional materials. There are situations where the...
02 February 2018 5,131 0 View
02 February 2018 6,186 2 View
Dear Respected RG Experts What is the correct term for heat treatment given to powder crystalline nanoparticles (oxides)? There is no phase change before and after heating, neither for removal...
12 January 2018 8,995 8 View
I want to anneal my bulk sample at around 1000 oC with magnetic field of 2 T. I want to make a furnace which can achieve my requirement. How can I design a furnace so that magnetic poles of...
01 January 2018 9,240 2 View
Hello, I'm trying to clone oligos into my lentiviral vector. I've been having problems doing so, so I thought about optimizing every step of the process. Is there a way for me to check if the...
01 January 2018 9,502 4 View
after induction annealing ,we need quench the HSS from 850 degrees to room temperature within one or two hrs
01 January 2018 5,940 0 View
01 January 2018 7,867 8 View