Contact experts in Annealing to get answers
8,960 views 670 posts
Questions related to Annealing
I have been working on n-Si/Metal Oxide hybrid heterojunction solar cells recently and MoOx seems like a promising p-type material for the completion of the structure. Yet I am wondering if it is...
05 May 2019 5,887 4 View
Titanium nanotubes was prepared by anodization and annealed at 500 ° C. How can I remove these nanotubes from titanium substrate for TEM analysis? Scrap? or ultrasonic treatment by ethanol? Thanks！
05 May 2019 9,971 8 View
It is universally accepted that the subgrain misorientations increased with strain. However, the misorientation saturated at 2~3° at strains of ~1. Why do the subgrains with small misorientation...
05 May 2019 5,810 2 View
Hello We have taken hot rolled and annealed stainless steel and forged it We are interested to find out its macro structure ? Please comment
22 April 2019 7,538 4 View
Please refer to the attached Figure, which has three parts, A,B and C. I first annealed complementary ssDNA in a PCR machine. Then, I heated the annealed dsDNA from 25 deg to 75 deg until all the...
18 April 2019 9,713 3 View
Hi! I'm new in the field of Fluorescent in Situ Hybridization (FISH). I want to use DNA FISH to visualize a small region in the human genome (around 1kb). I'm not sure if this is too short to use...
04 April 2019 9,226 3 View
04 April 2019 4,730 4 View
04 April 2019 2,261 3 View
I have a linear ssDNA oligo that is designed such that the ends are complementary, and conducive to hairpin formation (see attached figure). My question is, which has a higher likelihood of...
04 April 2019 2,459 5 View
Hi. I'm working on annealing of Al5083 and need to anneal that in salt bath. The temperature range of my experiments are between 200-500. I'd be appreciate to receive the name of proper salt for...
04 April 2019 4,523 1 View
Hello! I'm trying to perform a TaqMan qPCR to check for certain fish species in environmental DNA samples. I am using a published primer + probe set. The probe is carrying FAM at it's 5' end and...
04 April 2019 7,948 15 View
In cast iron (high Cr alloy) workpieces like centrifugal pumps or others, there are different geometries. How could this variation of shape affect the rendering of the heat treatment processes...
04 April 2019 9,874 3 View
Hello, I am trying to do a DNA annealing as shown in the figure. As can be seen, this is a three part annealing that involves three different oligos. 1)While there are softwares to check...
04 April 2019 4,494 2 View
Phosphor materials exposed to high temperature for few hours and suddenly brought to room temperature. I want know the effect of it on luminescence properties of phosphor .
04 April 2019 6,499 3 View
I'm trying to find a solution to dissolve particles CZTS- about 15nm.This solution has to have great adhesion to CdS layer. Recently, I have tried toluen and hexanthiol but I still can control...
16 March 2019 5,730 2 View
03 March 2019 4,335 2 View
Hello folks. I electrospun a blended polymer sample and annealed to make phase separation. To check if separation really happened, I want to see the sample through TEM. My sample is web and I'm...
03 March 2019 6,085 4 View
We have synthesized NaYF4:Yb, Er UCNPs and annealed for different temperatures in the range of 200 to 600°C . In the XRD we observed phase transformation from Cubic to Hexagonal, for the higher...
27 February 2019 3,963 3 View
What is the difference between N2 and O2 in thermal annealing of ITO
19 February 2019 4,861 2 View
After undergoing a solution heat treatment (air quenched) and full annealing heat treatment on my stainless steel samples it was observed the hardness of full annealed samples is more than air...
11 February 2019 9,817 6 View
I am trying to make TiO2 thin film using sol gel methode. for that, i follow this steps(T=25°C): 1/ 6ml of TTIP + 4ml of 2-Propanol (agitation for 10 min) 2/ 8ml acetic acide (agitation for...
02 February 2019 10,005 3 View
Thin films of CuO doped with different concentration of La deposited by spray pyrolysis technique at 300 C.
02 February 2019 5,730 4 View
02 February 2019 2,242 2 View
The FCC metals with low stacking fault energy forms annealing twins More at annealing temperature (0.6 - 0.8 Tm) .What is the relation between stacking fault and twinning mechanism in FCC metals.
02 February 2019 7,448 1 View