Adhesives with operation temperatures > 170C for bonding heat-resistant polyimde films ?

24 July 2016 1 1K Report

Trying to find adhesives for bonding heat-resistant polyimide films (like Kapton) for articles with operation temperatures >170C (the higher - the better).

Leonid

Paola Bernardo

There are some epoxy resins to be used at high T

(e.g., http://www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/very-high-temperature-epoxy-laminating-resin.html)

Badges
Science topic

More Leonid V Vladimirov's questions See All

Biomerieux API Campy performance?

Hello, I have a somewhat weird question: has anyone had problems with campylobacter growing in the second half of the strip GLU through ERO? Have you managed to correct it? There is some...

19 July 2024 3,094 2 View

Which edition do you recommend?

which publication do you recommend for submitting an article on the philosophical and sociological analysis of AI vs Society

30 January 2024 3,918 2 View

Can I add my preprints posted in the Zenodo repository to my list of scientific papers?

preprints on various scientific topics

04 July 2023 5,965 3 View

Could someone suggest a company working in the field of artificial meat (cellular agriculture)?

Hi, I am looking for a company operating in the field of artificial meat. By operating, I mean production or advanced stage of pre-production. I am looking for because we have some good solutions...

24 November 2022 7,258 8 View

Could anyone suggest a source of water soluble oligomers of polylactide?

I have seen in the literature that short chain poly-lactic acid (polylactide; PLA) oligomers are water soluble. But I am unable to find a commercial source of this type of oligomers. Does anyone...

31 October 2022 1,419 6 View

Can anyone suggest a mercury-free LED light source for fluorescence microscopy?

Can anyone suggest a mercury-free LED light source for fluorescence microscopy? I'm looking for the simplest and most economical replacement for mercury bulbs. Not the complicated stuff with many...

05 October 2022 6,057 3 View

WST-1, Roche, Cytotoxicity calculation?

Please only answer if you have done this and do not send me paper links. Thanks. Hi technical Gurus :) So, I am working on a cytotoxicity assay based on the Roche's WST-1 reagent. Every setup is...

15 September 2022 1,611 0 View

Could isopropyl alcohol (2-propanol) be used instead of DMSO for the stock solutions for cell cultures?

For various reasons, I need to avoid DMSO with my cells. So I wonder if isopropyl alcohol (2-propanol) could be used instead of DMSO to create my stock solutions library? I have learned that the...

04 July 2022 3,655 1 View

Why is the most common used liposome composition is DOPC/DOPG (80/20)?

Based on the literature analysis it could be concluded that one of the most common composition of synthetic lipids to prepare liposome mixture or model membrane (particularly in the work with...

28 June 2022 9,817 3 View

What are the possible reasons for fibroblastic transformation of confluent CHO-K1?

Hello to all I observed a strange phenomenon with CHO-K1 following the change of serum batch (it is surely the toxicity of this batch but I am very curious about the possible nature of this...

21 April 2022 6,157 3 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View