Which laboratories or institutes in Iran are able to determine estrogen hormone concentrations?

More Foroogh Khodadadi's questions See All

How can we calculate the amount of residual non-solvent (pore-former) additives in the membranes?

Dear researcher, We all use the non-solvent additives to improve the structure and performance of the polymeric membranes. However, the non-solvent additives can be easily washed out quickly with...

11 December 2019 5,714 1 View

How can I prepare the polymeric solutions ( polymer+solvent) without using magnets because of removing the PTEE white coating of magnet during mixing?

Dear researchers, I want to produce PES solutions using DMSO as the solvent. I have some tiny white particles in my polymeric solutions even after 48 h mixing using magnetic stirrer at 50 C. I...

09 October 2019 7,755 6 View

Is it true to consider the long macrovoids of a porous membrane as micro-channels?

Hi researchers, Based on the SEM images of the membrane cross section, at the sub-layer of a porous membrane, there are many long macro-voids. Can these macro-voids be considered as...

09 October 2019 7,597 2 View

Can Ethyl lactate dissolve the polysulfone family polymers?

Dear researchers, Ethyl lactate is a green solvent which can be replaced by toxic solvents such as DMAc, DMF, NMP, etc. But there are only a few reports for CA/Ethyl lactate. It seems this solvent...

07 August 2019 4,221 11 View

What is the reason for inserting RO modules "horizontally" in water treatment companies?

Hi researchers, The RO modules are designed in "horizontal packs" in water treatment companies. What is the reason? Could you please give me a reference? Regards Foroogh

31 December 2018 4,971 9 View

How can we estimate the bound water in a dried porous solid and the appropiriate residual moisture concentration?

We all know that during solid drying, free water and bound water has two different mechanisms. How can we estimate the bound water concentration in a porous solid?

08 September 2018 9,735 2 View

What is the difference between mixed polymer solutions by different kinds of impellers (mixer blades)?

Dear researchers, I used 3 different impellers to prepare the same polymer solution (fixed composition) which their pictures were attached. Why the prepared polymer solutions have different...

08 September 2018 7,674 22 View

What is the effect of turbulence and reynolds number on polymer solution properties during mixing step?

Dear researchers, I am preparing polymer solutions with this composition: Polymer= PVDF - 18 wt% Additive= PEG200- 5 wt% Solvent= DMAc- 77 wt% Firstly DMAc+ PEG mix at 100 rpm and 25 C and then...

08 September 2018 9,483 7 View

What are important differences between Lab-scale (glass bottle-50gr) and Pilot-scale (buchi vessel- 1 kg) polymer solution preparation?

Dear researchers, I am producing polymer solutions in both Lab and Pilot scales for membrane manufacturing. What are important differences between Lab-scale (glass bottle-50gr) and Pilot-scale...

08 September 2018 5,074 12 View

What is the reason of irregular lines on the PVDF membrane surface's SEM micrograph? Are they PVDF chains or the casting kinfe effect?

I made an UF membrane with 22 wt% of PVDF polymer and 5 wt% PEG200 in the casting solution. The dope solution was viscose. Some irregular lines are observed on the surface SEM micrograph. Are they...

02 March 2018 817 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

Samples to study circular dichroism (chirality)?

I want to build a low-cost polarimeter to study circular dichroism (chirality). What type of samples can I use? I am looking for samples that can be found outside the laboratory.

01 March 2021 9,101 3 View

How to accurately quantify chitin?

Hi all, I have been working on the quantification of chitin in insect samples and feed for a while but I can notice that the quantification methods (e.g. exposure to HCl, NaOH, and weighing sample...

01 March 2021 1,843 2 View

How can I publish a manuscript in free or low cost journal with good H-Index?

Dear all I am going to publish my manuscript which is from my thesis in a good H-Index journal but I found them very expensive(I don't have financial support) based on the exchange currency of my...

28 February 2021 7,800 6 View

Can anyone help with Schistosoma identification?

Can anyone identify what kind of Schistosome species this might be? Morphological features of cercariae and adults resemble Trichobilharzia, though I am fairly new to the field of parasitology...

25 February 2021 7,760 6 View

Suppose we have a banana seller cart consisting of 4 wheels, weighing about 300 kg. How much torque motors are needed to pull of push it electrically?

I am thinking of electrifying the street food carts while harvesting energy using solar panels on top.

22 February 2021 4,323 3 View

What is the best method to evaluate and measure non-circulating estrogen levels in mice ?

Could anyone suggest me the best procedure to measure the circulating estrogen levels in mice ? I came across the general methods where it can be measured in serum or urine but a detail suggestion...

22 February 2021 4,352 2 View

Does anyone have any experience with the Motic EasyScan Pro Slide Scanner?

I am interested in purchasing a slide scanner for histology and was presented with the Motic EasyScan Pro but I have never heard of the company, nor know of anyone who has used the system. Can...

11 February 2021 2,416 2 View

How do I prepare and store insect samples for JH measurements?

I need to preserve termite samples for future quantification of juvenile hormone in their bodies. Or extract the Juvenile Hormone and keep that samples stored for future quantification. I may need...

09 February 2021 1,995 1 View

Reza Hadavi

i think you can Using Solid-Phase Extraction and Liquid Chromatography

Tandem Mass Spectrometry .

https://labsnet.ir/committee/8

https://www.sciencelabs.ir/

http://irdci.ac.ir/page/103

http://www.ippi.ac.ir/iranpolymerinstitute

https://www.epa.gov/sites/production/files/2016-12/documents/lenehan-hormones_in_water_using_spe_and_lc-ms.pdf

good luck

Foroogh Khodadadi

Dear Reza Hadavi,

Thank you so much for your reply and time.

I contacted these laboratories but they do not perform the tests related to the determination of the concentration of Estrogenic hormones.

If you know other laboratories, please introduce them. Thanks.

Regards