What is suitable temperature at reaction mixture of lipase activity assay?

I use para nitrophenyl palmitate substrate with tris buffer ph 8... i read many temperature for Yellow color of para nitro phenol production.. 37 and 50 and 40 at water bath ... I confused as i...

04 February 2021 9,100 5 View

What is the difference between SEM and TEM and between FTIR and EDX in soil and plant?

If I want to know the changes (for example in plants or soils) as affected by specific substance on nano substance; when I use SEM or TEM and why? As well, when I use FTIR or EDX and why also? Is...

28 January 2021 5,070 9 View

Rmse in lstm when forecasting time series?

iam working on long memory time series data and i use lstm neural networ to train data and i want to understand how rmse is calculated is it calculated in each iteration separately or in each...

23 December 2020 6,740 4 View

Doping of r-GO?

if the percentage of doping Au into rGO is too small 1~10%, is it not enough to prevent restacking of r-GO in xrd results, rGO peak appeared at 22.2 and also the peaks of gold nanoparticles so...

21 December 2020 6,091 3 View

XRD peaks for gold nanoparticles ?

is the concentration of gold salt that were added will affect on the peaks appeared. i added a very little amount of gold salt to dope graphene oxide and not all the peaks that proved the...

17 December 2020 9,275 3 View

I saw sparkles in my samples?

i am trying to dope boron in graphene oxide , and after i take out my samples from the oven i put them in the microwave for 40 sec , and i saw sparkles . and fume also i couldn't understand why

16 November 2020 6,852 5 View

I am looking for efficient texture analysis software for MRI images analysis with free acess?

i am looking for efficient texture analysis software for MRI images analysis with free access?

09 October 2020 3,737 2 View

What is the alternative test that can be used instead of ANCOVA when the Homogeneity of regression slopes doesn't meet?

I have Pre test as a (covariate variable) and post test as a (dependent variable) and the treatment for the experimental group and the control group. and the assumption of Homogeneity of...

21 August 2020 7,196 3 View

What if find that the reviewer goes through your paper just to reject it?

What you should do if you found that one of the reviewers goes through your paper just to reject it and most of his comments are irrational and not constructive. Finally, he rejected the paper...

20 April 2020 5,336 51 View

Giemsa stain preparation tips, for chromosomes' staining, any advises?

Can any one advise me about the best protocol for Giemsa stain preparation? it gives me faint blue color not the ideal purple color, that makes the investigation difficult and the color is not...

16 March 2020 6,656 3 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View