I have some trouble while using the Emulsiflex B15.
Since last week, if i turn the air control knob to fill the sample inside the homogenizer, the sample does not enter well. And even if it enters, it is sucked in with a very very slow speed. The same condition occurs when i try with distilled water instead of sample.
I kept washing the machine with water and ethanol, checked the valve knob at the bottom, and checked the presence of air bubbles in the sample, but it doesn't work. How should we solve this problem?
Hey there Jeongsu Ryu,
Sounds like you're encountering some frustrating issues with the Emulsiflex B15. Let's tackle this together.
First off, it's great that you've already taken some troubleshooting steps. Checking the valve knob and ensuring there are no air bubbles in the sample are good initial moves.
Given that you're still experiencing slow sample intake, even with distilled water, it could point to a couple of potential issues.
One possibility is that there might be some blockage or buildup within the system that's impeding the flow. Have you Jeongsu Ryu inspected the sample inlet for any obstructions?
Additionally, considering that the problem persists despite washing with water and ethanol, it might be worth examining the air control mechanism more closely. It's possible that there could be a malfunction or adjustment needed there.
If these steps don't resolve the issue, it might be time to reach out to the manufacturer or a specialist for further assistance. They could provide more targeted guidance or even arrange for a service visit if necessary.
Hang in there! We'll get this sorted out.
- Badges
- Science topic
- Similar topics
- Biological Science
- Molecular Biology
- Biomolecules
- Proteins