Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

Error in comsol?

Dear respected researchers, while performing CFD analysis in Comsol it's showing like this Error: Nonlinear solver did not converge. The maximum number of Newton iterations reached can...

24 February 2021 249 3 View

Comsol Maximum number of Newton iterations reached?

Comsol is investigating deformation due to gravity. Gravity is applied to the nanosheets to check for displacement and stress. If I input the Young's modulus of the channel to about 1 [GPa], the...

15 February 2021 6,027 3 View

Having 2 different substrates under the same deposit conditions (TiN coating) why it is possible to obtain different colours in the 2 dif substrates?

Coating is made by same deposit conditions. substrates are HSS Drill bit and Shim SS 300 series. On the drill bit we are getting some golden color, however on the shim we got no color it is like...

08 February 2021 9,383 7 View

Any resist stripper which can remove thick metal based polymer residue and which is compatible with doped silicon ?

I am looking some resist strippers which can easily remove metal based polymer residue after post dry etch process. I have some candidates below but not sure if they are compatible with doped...

21 January 2021 3,008 3 View

What is the maximum time duration allowed between photoresist coating and exposure?

I have coated the Silicon wafer with photoresist (AZ1518) but until the exposure (Laser Writer) I had to wait for more than a week (Laser Writer was not operative) - would the photoresist still be...

03 January 2021 9,640 4 View

How to solve a finite difference equation with both time and space derrivatives?

23 December 2020 2,764 3 View

Absorption coefficient of atmosphere at sea level versus wavelength?

I'm looking for some raw data for the transmission through the air in my lab, specifically in the MIR region. I've found a lot of data online that gives transmission vs wavelength, but the units...

22 December 2020 9,039 2 View

Is there a paper summarising optimisation techniques and their properties such as convergence speeds ?

I am looking for a document that summarises mathematical results for optimisation techniques : steepest descent, newton and quasi-Newton, their convergence speed in different settings...

19 December 2020 2,908 8 View

For Petroleum Engineers in Ontario, would a P.Eng designation be recommended?

For anyone attempting to find a job as a petroleum engineer (whether it be a reservoir engineer, drilling engineer, etc.) in Ontario, Canada... is it recommended that they acquire a P.Eng...

14 December 2020 5,402 3 View