What is the best way to create a Vector file for any figure?

Some journals ask for a vector file for the figures/diagrams submitted for the article. What is the best way to create a vector file from your Microsoft Excel chart?

01 February 2021 6,344 2 View

Is it possible that the strain hardening exponent(n) for Aluminium 1060 alloy is greater then 0.3?

I have got the strain hardening exponent value 0.5637 according to ASTM E646 standard.

29 April 2019 3,148 3 View

How to give rotation to any circular plate in LS-DYNA?

I want to give rotation of 20 rev/min to 0.9mm thick sheet of different aluminum grade blanks.(Axis of rotation is about X-AXIS)

19 November 2018 389 4 View

Which guidelines do we follow in selecting sample size?

Scientific survey need practically large sample size. Is there any concrete guidelines? Pl throw some light on it

26 January 2018 4,044 13 View

What is rotated component Matrix in Stastical analysis?

Whenever analysis of data is made through SPSS, we get rotated component Matrix. How do we understand the value that we get and what could be its significance.

31 December 2017 6,560 10 View

Is EMOTIVXAVIER the software to Get Green signals in the software for the detection of sensors of EPOC sets?

The sensors of EPOC Headset are not getting detected but somehow the Cognitiv Suite is showing response. Is it noise which I presently feel to be the response. Please guide me how I can get the...

09 February 2015 1,479 1 View

How to decide a dose of drug to be incorporated, while studying Caco-2 permeability study?

I am going to perform permeation study of some drugs. I got the whole process for the same, but I am not getting how to decide the dose/ amount of drug to be incorporated in the donor compartment.

16 November 2014 9,313 2 View

How one can find the location of drug in polymeric micelle (whether in the core or pallisade layer)?

Can we assume from FTIR that our drug is encapsulated in micelle or not or we must have to go for 2-D NMR?

17 August 2014 4,553 15 View

Why colleagues don't cooperate? Why do they hesitate to accept good work of colleagues?

I have observed that most of the people are always happy to create hurdles and happy to see others distressed. Have you also experienced such situation?

01 January 1970 4,389 37 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How does elongation affect the resistance of an electrode?

What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.

22 February 2021 1,515 1 View

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View