What is the best way to create a Vector file for any figure?

Some journals ask for a vector file for the figures/diagrams submitted for the article. What is the best way to create a vector file from your Microsoft Excel chart?

01 February 2021 6,344 2 View

How to give rotation to any circular plate in LS-DYNA?

I want to give rotation of 20 rev/min to 0.9mm thick sheet of different aluminum grade blanks.(Axis of rotation is about X-AXIS)

19 November 2018 389 4 View

How to know surface coverage of thin film on the electrode?

After preparation of thin film on the electrode, how one can know its surface coverage

29 March 2018 4,964 1 View

Which guidelines do we follow in selecting sample size?

Scientific survey need practically large sample size. Is there any concrete guidelines? Pl throw some light on it

26 January 2018 4,044 13 View

What is rotated component Matrix in Stastical analysis?

Whenever analysis of data is made through SPSS, we get rotated component Matrix. How do we understand the value that we get and what could be its significance.

31 December 2017 6,560 10 View

Is EMOTIVXAVIER the software to Get Green signals in the software for the detection of sensors of EPOC sets?

The sensors of EPOC Headset are not getting detected but somehow the Cognitiv Suite is showing response. Is it noise which I presently feel to be the response. Please guide me how I can get the...

09 February 2015 1,479 1 View

How to decide a dose of drug to be incorporated, while studying Caco-2 permeability study?

I am going to perform permeation study of some drugs. I got the whole process for the same, but I am not getting how to decide the dose/ amount of drug to be incorporated in the donor compartment.

16 November 2014 9,313 2 View

How one can find the location of drug in polymeric micelle (whether in the core or pallisade layer)?

Can we assume from FTIR that our drug is encapsulated in micelle or not or we must have to go for 2-D NMR?

17 August 2014 4,553 15 View

Why colleagues don't cooperate? Why do they hesitate to accept good work of colleagues?

I have observed that most of the people are always happy to create hurdles and happy to see others distressed. Have you also experienced such situation?

01 January 1970 4,389 37 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

How to determine solutionizing time for cast Al alloys?

For wrought alloys soaking time at solutionizing temperature is determined by thickness .Do we have such standards for cast Al alloys

23 February 2021 8,839 3 View

Which thermal conductivity test recommended for Ag-Cu nanofluid?

I have prepared Ag-Cu alloy with polymer coating upon it.... how can I measure thermal conductivity of it ?

22 February 2021 5,915 3 View

How to generate AA6061 alloy or any aluminium alloy crystal in material studio?

I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.

22 February 2021 1,410 1 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

What are damage parameters for SMA while modelling on ABAQUS 2020?

I have given Elastic and Superelastic material properties, but I think we need to provide the damage parameters also. Please help me here.

16 February 2021 8,694 1 View

Are there alternatives to the Devarda alloy when estimating nitrogen?

Are there alternatives to the Devarda alloy when estimating nitrogen? devarda alloy is reducing the nitrate to ammonium

15 February 2021 8,838 3 View

Passivation of chromium cast Iron in high temperature?

14 February 2021 2,157 3 View

How can we quantify martensite in Ferrous and Titanium alloys?

How can we quantify metastable phases like martensite in Ferrous and Titanium alloys, in relation to their stable counterpart For example in EBSD, XRD, Optical? Eg, Martensite and Ferrite maps.

09 February 2021 7,572 3 View