Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Cracked MEMS cantilevers despite wet release and critical point drying?

I have successfully released MEMS cantilevers with a photoresist sacrificial layer, using a dry plasma ashing technique. However, this process tends to damage the metal contact pads and result in...

15 November 2020 8,963 6 View

How to solve two temperature model for ultrashort laser ablation in COMSOL?

24 May 2020 7,273 5 View

Hello Everyone, I am trying to regress a numeric variable on all categorical variables, which method would be the most suitable, ANOVA,Linear Regrsn?

I tried running Linear Regression but I feel the model has heteroskedasticity.

03 May 2020 6,874 6 View

Which method is precise and reproducible to determine concentration of 0.5% w/w Glutaraldehyde; Titrimetry or GC ? Describe the method in brief?

Glutaraldehyde, in low concentration at buffered pH 7.2, is used as a shipping solvent for Medical devices involving animal tissue. Suggest a accurate and reproducible method for determining assay...

12 March 2020 6,032 1 View

When to use bounded Second Order Implicit Time Integration in Fluent?

Fluent offers different temporal discretization schemes. There are two implicit schemes: Second order and bounded second order. I am wondering what are the advantages and disadvantages of these...

12 December 2019 3,795 4 View

How to model a chemical reaction in Fluent involving gaseous reactants and solid product?

I am currently simulating a system involving various chemical reactions. My primary phase is gaseous and secondary phase is solid. There are reactions involving solid to solid and gas to gas...

02 May 2019 3,826 3 View

Can I use k-epsilon turbulence model for transitional flow?

I have a geometry where the flow is transitional. i.e. a part of it has laminar flow and rest part has turbulent flow. Can I use k-epsilon model for this problem? Does it resolve the laminar...

28 March 2019 6,428 19 View

How to get the diameters of droplets in Fluent?

I am simulating a diesel spray in air. I want to get the number of droplets and their diameters (preferably individual over mean) at certain time step. How can I extract this data?

13 December 2018 8,433 3 View

What are the advantages of Finite volume method (FVM) over Finite difference Method (FDM) for particularly flow simulation (CFD) ?

Most of the CFD solvers use FVM. However, FDM is pretty simple to implement. I am interested to know exactly what advantages do FVM offer. And when should one go for FDM if he is planning to write...

13 December 2018 8,641 38 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View