I want to perform SPIF on abaqus for a truncated cone geometry, how to give the spiral tool path? Any specefic way?
I suggest you follow https://www.youtube.com/watch?v=7cAStTfabxM
https://classes.engineering.wustl.edu/2009/spring/mase5513/abaqus/docs/v6.6/books/usi/default.htm?startat=pt03ch11s13s07.html
@muhammad I didnt mean that. I want to give displacement to the tool which will move in a spiral path deforming the sheet metal.
hello
there is your example subroutine.
if that work right please help me.
I am performing a simulation on incremental sheet forming process using Al 6061 material. I have a forming limit diagram (FLD). I have input the FLD in Abaqus. Still not getting any visible damage...
19 May 2021 626 7 View
I am doing a simulation on Incremental sheet forming using Al6061 as material and considering anisotropy. I am using a single step with amplitudes created on matlab. How to select the step time so...
16 April 2021 1,614 1 View
I have a truncated pyramid geometry with 45 degree wall angle and 15mm height. I want to give a normal z level tool path for performing isf.
03 April 2021 5,059 0 View
I am using Al6061 sheet with 1.2mm thickness. What will be the safe force for it?
10 January 2021 3,604 0 View
Hi, I am using pyproj to re-project Canada's Census Tract boundary shapefiles that are currently in "PCS Lambert Conformal Conic" system. I want to convert them to latitude and longitude WGS84...
29 October 2020 8,216 0 View
Im trying to do an abaqus simulation on incremental sheet forming. I have plotted the xy graph on reaction force on reference point on the tool. The reaction force in the tool is showing negative...
31 August 2020 8,374 7 View
For example, we have EEG signal having 64 Hz frequency. We need to decompose the signal into sub-bands. At the first level of WPD, approximate and detailed decomposed signal have 32 Hz and 32 Hz....
02 May 2020 8,679 0 View
I am analysing the EEG data to classify the Rapid Eye Movement Behaviour Disorder and control health patients. I have to separate the sleep interval from EEG data.
26 January 2020 5,482 4 View
I am trying to prepare the nickel sulphide (NiS )from mixing of nickel nitrate Ni(NO3)2 sodium sulphide in equal amounts and then pass H2S gas and few ml SDS also mixed in solution .The solution...
20 September 2019 3,457 0 View
if a distribution transformer is unbalanced .What was the standard rating or cross line for the load is balanced or unbalanced.Means if three lines are 100 kw each loaded .So whats the range of...
30 November 2018 5,892 0 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
Dear Siesta Users, I installed Siesta 5.0.1 and I want to use Grimme's D3 correction. According to the 5.0.1 manual, I could use a few parameters to include the D3 correction in the...
27 July 2024 5,748 0 View
Hi everyone, I am working on a curved domain in which a ship is situated in the middle (geometry is given below). In my understanding the general fluid flow is parallel to the x axis from inlet to...
25 July 2024 9,058 4 View
We assume that there is a physico-statistical meaning to the constant π other than circular geometry, but the iron guardians of the Schrödinger equation deny this. The iron guardians of the...
22 July 2024 4,285 9 View