What should be the optimal thickness of thin film (Perovskite QD-CsPbBr3) for this measurement?
I was using Desmond for the MD simulation. I had done a simulation but got an error in the simulation result analysis. When I open the simulation interaction diagram wizard and load out.cms...
25 April 2024 3,646 0 View
Science Red seaweeds have a good quantity of water-soluble phycobiliprotein, which may precipitate during extraction with some of the solvents. Thus, I am searching for a better solvent to...
26 October 2023 1,196 1 View
I am using UDCAM-s model in PLAXIS3D to understand the behavior of clayey soil during cyclic loading, but am not able to input the 3D Contour curves available in research papers into my model. If...
17 January 2022 3,076 0 View
I have fungal contamination in my macroalgal culture. Fungal contamination is severely degrading, defragmenting, and bleaching the algal thallus. I welcome any suggestion to remove it.
07 June 2021 8,245 4 View
I am Vidushi Sharma, from HR & OB specialization. I want to know that is there any group for HR & OB academicians where they share their knowledge and also share about the requirement of...
18 May 2021 4,910 2 View
One invention granted for the US and European patent will be counted as one patent or 2 patents for CV writing?
05 January 2021 8,463 4 View
for e in NDVI_crops: NDVI_crops2 = e.data[~e.mask] # Exclude non-cropland pixel values NDVI_crops2 = NDVI_crops2[~np.isnan(NDVI_crops2)] # Exclude poor...
18 October 2020 2,319 0 View
Mod13q1 and mcd12q1 based explaination will be a plus.
27 April 2020 2,244 0 View
Two Predictors: Dyadic Adjustment and Interpersonal Needs Three Criterion: Positive Affect, Negative Affect and Satisfaction with Life
07 April 2020 4,209 0 View
I am working on hyperelastic material using axisymmetric geometry. I have been trying using constraint equation(Abaqus) in input file. I have created a reference point outside the geometry and...
09 December 2019 1,920 3 View
A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...
11 August 2024 9,801 2 View
How can I measure the thickness of thin film by Uv-Vis?
06 August 2024 7,810 3 View
Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?
03 August 2024 7,035 3 View
I'm trying to calculate the tolerance factors of the hydride perovskite and the value calculated by me and the reported values are contradictory. Need more clarity in using the correct ionic radii...
01 August 2024 2,614 1 View
I need something like Camag's VisionCat software for photodocumentation of TLCs. Could you recommend something?
31 July 2024 8,415 1 View
Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...
30 July 2024 906 2 View
My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...
28 July 2024 2,794 6 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View
I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...
16 July 2024 5,031 1 View
I am facing a difficulty to prepare the thin film which contains fluorine contained silica monomer, as we know F is highly reactive with low surface energy and it could be the reason of low...
09 July 2024 6,017 3 View