Dear all,
Can sulfate radicals oxidize and introduce oxygen-containing groups on carbon surface?
Thanks in advance.
Carbonaceous materials have been widely used in various applications, such as adsorption of organic contaminants, electrodes of various batteries and super-capacitors, OER catalyst, ORR catalyst,...
09 October 2018 3,988 0 View
Hello everyone, I am a new learner in the field of CDI. I read some review papers on CDI recently but still have some questions. Hope I can get some comments from you. (1) Why carbon anode: As I...
06 July 2018 8,275 0 View
Hi dear all, Recently, I am doing research using activated carbon (AC) cathode to reduce O2 for H2O2 generation. However, I found after saturated by reactive blue 19 (a dye), the performance of...
01 February 2018 3,885 7 View
Dear all, In my experiment, I use a carbon foam electrode (2cm*3cm), when I calculate the current density, should I use 6 cm^2 as electrode area, or estimate the real surface area? Thanks in...
01 February 2018 8,118 0 View
Hello everyone, Recently, when I used anodization to modify the graphite felt electrode, I found the solution changed to yellow, some unknow power was also generated and floating on the liquid...
01 February 2018 8,015 7 View
Sulfate radical based advanced oxidation process is a hot topic in environmental remediation. Usually, it was generated by activation of persulfate or peroxymonosulfate. Recently, transition...
31 December 2017 4,104 0 View
For electrochemistry, why do people just use DC(direct current) power? Why not use AC(alternating current)? I found some researches focusing on pulsed power. One reason is that for most...
11 December 2016 6,545 1 View
Thanks for all your time. Here, I have two questions: (1) Some researchers found that after electro-generation, some H2O2 diffuse to bulk solution, some would transfer to H2O on cathode surface....
10 November 2016 2,774 3 View
In electro-Fenton system, we would like Fe2+ could be effectively regenerated and function as a catalyst. However, it is known that as a positive ions, cathode would absorb Fe2+, resulting in a...
09 October 2016 4,427 4 View
For elctro-Fenton system, if a modified cathode can capture O2 from air when aeration, will it be an innovative idea and make the system more economic since air is cheaper than pure O2? Is it...
01 January 1970 9,764 4 View
I'm a graduate student who works with an anaerobe, so I often work in an anaerobic chamber. I've been working on an assay that involves the steady-state of the quinone/ quinol pool. Anoxic...
03 March 2021 2,971 1 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?
25 February 2021 4,075 1 View
Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...
24 February 2021 3,785 3 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
Hi every one Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software? Biogas fuel is not available in the options thanks
23 February 2021 6,518 3 View
My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...
22 February 2021 2,965 4 View
I performed a Proton NMR of graphene powder prepared by electrochemical exfoliation technique. It shows some peaks. But I can't understand it.
21 February 2021 8,947 3 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View