A tough, malleable, iron-based alloy containing up to, but no more than, two percent carbon and often other metals. It is used in medicine and... | Contact experts in Steel to get answers
1,115 views 2,627 posts
Questions related to Steel
One of my friend completed his bachelor degree in mechanical engineering. But now likes to join in computer science engineering related master degree program. Is it possible to do masters in...
19 April 2023 2,257 9 View
I need 17 MPa adhesion or more. I use epoxy silane and aminosilane, but these materials don't increase adhesion enough. recently I notice that I can combine a resin with epoxy to improve adhesion...
19 April 2023 3,358 0 View
Indium dissolve in Nitric acid, how indium can be separated from it?
18 April 2023 5,242 2 View
Why static coefficient of friction dry contact between "Ag-Ag" is highest among materials? Cu-CI,Pt-Pt, Al-Al,st-rub, Rub-Rub are comparatively lower? By applying formula, however we can see...
18 April 2023 2,499 4 View
I run an impedance test with mild steel coated with polymer coating. The impedance is showing very abnormal pattern as shown in the pic. On the other hand, when I was running the same Nyquist test...
17 April 2023 9,776 2 View
Hi, I run the OCP corrosion test with the help of corrosion cell keeping Saturate calomel electrode as reference electrode, Stainless steel as working electrode and graphite as the counter...
15 April 2023 5,043 5 View
can anybody help me?! I'm researching on depositing pyrolytic carbon for about a month and I really stuck on the characterization methods. because the distinguishing this material from graphite is...
14 April 2023 1,706 3 View
the atom of Carbon should be respect the Octet rule. But our professor tells us otherwise
12 April 2023 1,144 3 View
How can current issues in both conventional and solid-state additive manufacturing processes? What are the various metallurgical solutions available for effectively eradicating interlayer defects...
12 April 2023 7,561 3 View
I am doing cold rolling on aluminum alloy AA5251. Then I annealed for 12 hours at 425C. the result is the microstructure before and after rolling why is it still the same? There was no difference...
11 April 2023 9,395 2 View
I'm studying the ion-ion plasma thruster, I want to simulate the magnetic filter in it. The thruster I want to study is similar to that designed by St ́ephane Mazouffrea and Denis Renaud which has...
10 April 2023 5,522 0 View
I need to purify a cut vector to make it super clean and with no uncut vector. Previously this has been done by Cesium Chloride extraction but we can no longer do that here and I can't find any...
03 April 2023 9,077 0 View
How accurate are XRD measurements with Rietveld analysis when compared to other measurement methods in determining the weight fraction of carbon in steel? Hopefully those experienced with this...
01 April 2023 3,670 6 View
I am currently studying the friction behavior of materials, and I am curious about how surface roughness affects the friction coefficient. Does increasing the surface roughness of a material...
30 March 2023 1,722 1 View
Hello, My name is Wan. My focus research area is on Battery chargers. I would like to know the part for Constant Current charging. As i have done a simple circuit for the cut-off battery charger...
30 March 2023 4,554 3 View
Hello, Are there simple ways to measure oil densities at high temperatures (50-90°C) by means other than a densimeter? Thank you in advance
27 March 2023 3,946 2 View
Properties of high entropy alloy
24 March 2023 7,956 2 View
We perform research and manufacture devices with around 1uL droplets of aqueous solution. It would be great to be able to add a fluorescent probe or marker for absorbance which produces a strong...
24 March 2023 8,464 2 View
I want to analyze a tall building for performance based wind design, How and where can I get the time-history wind load function ?.
21 March 2023 6,548 3 View
The approaches to establish grain boundary structures, such as molecular mechanics and density functional theory, does not provide the information on grain boundary formations at finite...
21 March 2023 5,884 2 View
There are different types of crucible material is available for calcination. What are the different crucibles that can be used for talc?
21 March 2023 5,309 2 View
High Entropy Alloy in bulk form is required
20 March 2023 4,154 2 View
What's up colleagues I am recently starting on the subject of Density Functional Theory, but I have some doubts about it when trying to simulate corrosion inhibitors with Gaussian. I would like...
20 March 2023 6,041 1 View
How to choose the optimal drawing speed for S235 steel or low carbon steel "in wire drawing"?
18 March 2023 5,113 0 View