A tough, malleable, iron-based alloy containing up to, but no more than, two percent carbon and often other metals. It is used in medicine and... | Contact experts in Steel to get answers
1,116 views 2,627 posts
Questions related to Steel
I produced a fire crucible, but unfortunately, it cracked after two uses. How can I improve its performance? I think the problem is in not choosing the correct granulation of raw material particles
24 June 2023 1,443 5 View
Based on symmetry,many phase field simulation studies consider four NI3AL type gamma prime variants. Is this valid for multi-component alloys where more complex ordering may exist.
23 June 2023 5,036 1 View
Any formula or any other methods for the calculation of curvature of Steel fibre reinforced concrete beams using strains or any other parameters or valves taken during the experimental
20 June 2023 4,595 0 View
Empherical formula to calculate the Young's modulus of Steel fibre reinforced concrete using any concrete strength valves
20 June 2023 8,858 0 View
20 June 2023 2,900 0 View
Hi for all, What are the concepts to covert the wind speed to frequency?
19 June 2023 5,183 1 View
In FE if performing the Gauss-q integration with 1000 point is their any benefit
18 June 2023 6,542 0 View
Hey researchers, I am working on Elliptical CFST short columns, and currently, I am using the Abaqus software to prepare my model. I need to use High strength steel in this model. While modeling,...
17 June 2023 670 2 View
We have got InSituCellDeathDetectionKit_Roche for TUNEL staining assay in intestinal tissue sections. What are the alternatives for proteinase K permeabilization? Can we use trypsin instead and...
16 June 2023 1,466 2 View
I have come across this term several times. want to know the thermodynamic principle behind this. Can anyone suggest me suitable literatures in this regard?
16 June 2023 3,155 1 View
Hi, In my microstructural calculations by the Rietveld method, I need structural data of the Fe9TiO15 compound formed during Rutile-Iron grinding.
15 June 2023 6,405 2 View
we synthesis sodium salt of malic acrylic copolymer, when I tried to measure the solid content in oven at 150 °C for half an hour the result be 37.2% but when I tried to use refractomer the result...
14 June 2023 7,944 5 View
Hello, I'm trying to calibrate a material I tested in real life for Abaqus, but the program keeps displaying the error whatever I do. I even converted the stress-strsin curve from engineering to...
14 June 2023 5,430 3 View
I need these ground motions records with the same PGA exactly. If there is anyone have them please tell me to contact with you quickly. Thanks alot.
11 June 2023 5,506 0 View
11 June 2023 8,474 3 View
Recently we have fabricated a biobased nanocomposite films from PLA/CNC by effective blending then solution casting method followed by EIPS. But for a perticular composite it has clerly been found...
09 June 2023 5,670 7 View
Does freezing and melting increase entropy and does evaporation increase entropy?
08 June 2023 9,081 1 View
Hello everyone, What is the most convenient method to machine a notch in a compact tension specimen according to ASTM E647 standard? I do not have the option to use wire cut EDM and I'm just...
08 June 2023 2,958 2 View
Hello everyone, I'm currently studying steel bars embedded in concrete and conducting electrochemical measurements to analyze their corrosion behavior. I have used Linear Polarization Resistance...
02 June 2023 9,698 1 View
I am trying to calculate the percentage of retained austenite in Maraging steel through XRD analysis. How can the chemical compositional % of each element present in the martensite and retained...
31 May 2023 6,338 2 View
I need to know how the nanoparticles can improve the performance of polymers in terms of their mechanical behaviour and other characteristics. Thank you!
31 May 2023 1,543 6 View
Tests: 1. Tensile Test 2. Flexural Test 3. Impact 4. Bending 5. Water Absorption Material: Kenaf, Jute and Glass
30 May 2023 2,321 4 View
I saw there are isoductile and anisoductile damage types in damask 2.0, what are their counterparts in damask 3.0. If I want to simulate the ductile damage of aluminum, how can I set it up in the...
29 May 2023 3,461 14 View
What are the Marketing strategies adapted by the Laundry care products or FMCG dry cleaning powder's?
29 May 2023 8,773 1 View