A tough, malleable, iron-based alloy containing up to, but no more than, two percent carbon and often other metals. It is used in medicine and... | Contact experts in Steel to get answers
1,117 views 2,627 posts
Questions related to Steel
Hi, I am now setting up thermal transport measurement device for small diameter sample. I found a model metioned in this paper(Description of the parallel thermal conductance technique fo... ),...
02 December 2022 9,682 0 View
I'm trying to separete by HPLC-RP veratryl alcohol from its oxidation products, however, as the oxidation occurs the chromatographic peak for veratryl alcohol increases with the time contrary to...
29 November 2022 8,884 0 View
I will use steel tube of 300 mm of lenght and GFRP bars of 6.4 mm of diameter.
28 November 2022 6,010 1 View
I have a weir as shown in the figure attached. Can you kindly please give me a scientific name for it. It has different heights for the same crest. Are there any papers using this shape of weir?
26 November 2022 6,088 0 View
I am modeling a certain response in Design Expert under central composite design. During my runs, the model arrived with a significant value, no significant lack of fit, and a good adjusted and...
26 November 2022 1,731 1 View
Hello everyone, In my research project i have air flow velocity and temperature distribution simulation from supply and return air duct in non furnishing control zone, which turbulence model is...
25 November 2022 4,765 2 View
AlLi (aluminum lithium) and AlBe (aluminum beryllium) alloy has wide application in aerospace/defence structural applications. What is the industrial practice of making these two alloys? Whether...
25 November 2022 8,548 3 View
I want to know The reason for the non-occurrence of the termination reaction in anionic polymerization
23 November 2022 792 3 View
I am currently creating a shell model of steel angle with two faces. I need to connect two edges of two separate faces by MPC Beam so as to form the rigid connection of two faces. I attached...
22 November 2022 2,005 4 View
If a semiconductor is doped with any impurity then how one can calculate the number of doping atoms and carrier concentration from experimental data and what characterization technique will be...
21 November 2022 384 3 View
Is it possible to remove nanometre resin sections containing cells from TEM grids without removing the existing coatings e.g Formvar/carbon coats Thanks in advance!
21 November 2022 2,677 7 View
In the case of GDC, the ionic radius of Gd3+ (2.38 Å) is smaller than that of Ce3+ (2.48 Å).
18 November 2022 6,316 4 View
Machining of steel metal will result in surface integrity which is related to tribological effects. Does the content and final phase occurring in iron-carbon alloys on steel surfaces have an...
18 November 2022 2,363 3 View
Microstructure : alpha ferrite matrix + bainite + martensite
18 November 2022 6,157 0 View
Dear SEM experienced Users 😊, I’m thinking whether it is possible to make sthg like “variance decomposition” of latent variable in Structural Equation Modelling (SEM)? Let’s imagine we’ve got some...
17 November 2022 6,363 4 View
After processing, I obtained the kam data of the node in incremental step 20 and saved it in a txt file. In damask3.0, how to map this data to vtk for visualization? import damask import numpy as...
17 November 2022 2,068 3 View
I modeled Lamb waves propagating in a carbon fiber composite plate by using the semi-analytic finite element method and solved the partial differential equation by using COMSOL PDE module. The...
17 November 2022 6,687 2 View
Help i am getting the following error message in abaqus **WARNING: Surf-1 is ambiguously connected at node ###. This surface cannot be used with *CONTACT PAIR. ***ERROR: 1 improperly defined...
17 November 2022 1,986 3 View
Dear colleagues For a study on chiral properties (actually of water, yeah, I know..) I need pure - both chiral and chemical enantiomers of 2 butanol - R 2 butanol and S 2 butanol. Just buying...
16 November 2022 7,721 2 View
I'm trying to model a cohesive element in 3D that will glue parts together. two parts (bulk material) are going to be glued using a cohesive element. I'm willing to do so using the offset solid...
16 November 2022 2,089 1 View
Round billet are prone to central porosity and segregation particularly high carbon grade with 0.56-0.60 % C, Al killed 0.015-0.030%, S 0.005.
16 November 2022 6,116 2 View
Greeting, am working on optical OFDM system design as a first step in my simulation using Optisystem15.0 & i need some tips to correct the system. I hope to have some help in that issue.
15 November 2022 6,981 0 View
What are the steps of designing a lab scale fixed bed catalytic reactor for a gasous input?
15 November 2022 4,321 3 View
I have scanned neat PA6 (Nylon 6) sheet samples using D2 Phaser, and the obtained XRD pattern is attached. I would appreciate it if someone could help with the procedure for curve fitting...
15 November 2022 1,081 10 View