Review and cite BATTERY protocol, troubleshooting and other methodology information | Contact experts in BATTERY to get answers
9,096 views 515 posts
Questions related to Battery
I want to calculate the shelf life ESL (Electronic Shelf Life)
28 November 2019 9,529 3 View
I am trying to generate discharge profile of Li-ion coin cell battery, such as CR2032 for different discharge loads at different temperature. Currently, I am using Dualfoil battery simulator, but...
20 November 2019 1,526 1 View
I like to start working in dispersions of carbon nanotubes in NMP for battery applications. Talking to different people, things like NMP-water updtake and dry-room requirements were mentioned. I...
20 November 2019 7,860 1 View
I am using WS2 as anode material for Li ion and Na ion batteries. EIS data shows that the diameter of the circle is decreasing with increasing number of cycles, indicating charge transfer...
17 November 2019 7,122 3 View
It charges in 2 Hr up-to 4.5 V but sudden potential drop up to 1.5 V during discharge process.
14 November 2019 8,978 10 View
I am looking for the optimal method to simulate the behavior of a lithium battery. I managed to implement part of Thevenin battery model in PSIM. I do not have licensed software such as mathlab or...
06 November 2019 8,502 5 View
I'm looking for a microgrid simulation model written in simulink in order to implement my simulation data and test my Energy Management System algorithm. The microgrid I am looking forward is a...
25 October 2019 3,730 4 View
Hi, I am working to a new project about the correlation between acute stress and inflammatory response. The design of the study will be an RCT, and I am planning to do a stratified random...
23 October 2019 1,540 3 View
What is the maximum charging current, that can be given to a 12V, 2.5Ah Lead-acid battery? Any standard equation is there? What is the reason? Whether the condition is the same for Li-ion...
22 October 2019 4,680 1 View
for my simulation model, I am looking for the temperature coefficients of batteries. Any help is welcome, if you link me with the corresponding article, I will use it as a reference. Thank you
15 October 2019 887 2 View
I would think higher ionic conductivity would mean faster charge and discharge rates, and perhaps a slight bump in capacity due to capacitative effects (E=1/2CV^2), but surely the overall mAh/g...
14 October 2019 5,341 6 View
Dear colleagues, i am trying to carry out a model for the aging of li-ion battery to predict the battery's lifetime. However, as i don't have any experience with it, i would super grateful to get...
08 October 2019 7,524 3 View
We already now that while changing the duty cycle of DC/DC converter in order to track the MPP, the output voltage of the converter is going to be changed as well. So, the output voltage...
07 October 2019 8,816 5 View
What kind of electrochemical experiments should we do? Thank you in advance
03 October 2019 4,975 3 View
I searched a lot around, but haven't really found yet concrete information about how many kilograms of each of those compounds mentioned above end up in batteries for electric vehicles. Clearly,...
01 October 2019 9,544 3 View
The garnet like LLZO is prepared mainly through solid state reactions. Can anyone suggest me a method other than solid state method to synthesize LLZO?
30 September 2019 9,843 5 View
I'm trying to understand quantitatively how changes in road elevation/grade impact efficiency values and SOC discharge rates for battery electric buses. I'm hoping to find an equation that relates...
18 September 2019 1,694 2 View
Hello there, I have been struggling to wrap my head around which statistical analysis to use for my research question: I have 17-20 potential outcome variables (subtests on a cognitive battery,...
11 September 2019 10,158 3 View
Hii, I want to calculate the specific capacity (C/g) from CV and GCD curves for a symmetrical battery type supercapacitor device. So, can any one please help me in this regard. Thanks in advance.
11 September 2019 7,254 4 View
im using 250 watt panal to charge a battery using PandO MPPT algorithm
10 September 2019 5,836 2 View
Can anyone help to calculte the max power for each time slot below. - Discharge at 1-minute peak power for 30 sec - continuous discharge at peak power for 1 min, 5 min and 10 min, where peak...
10 September 2019 4,970 3 View
I have a project to reduce 48volt DC 10 A from Li Ion battery to 12vDC 1 A. Anybody knows the circuit? Some attempt produce heat and finally fail.
02 September 2019 9,965 3 View
When distributed BESS controllers detect voltage violations (say lower limit violations) at more than one buses at time “T seconds”, they would compute the required ‘power exchange’ between BESS...
30 August 2019 280 0 View
I work within a research team that is trying to ship a 10kWh li-ion battery and 2kW PV roll from UK to Kenya and we have been struggling to find agents that can undertake the shipment. Does...
29 August 2019 1,850 2 View