Review and cite BATTERY protocol, troubleshooting and other methodology information | Contact experts in BATTERY to get answers
476 views 138 posts
Questions related to Battery
This may also be referred to as accelerated stress testing.
01 February 2015 349 3 View
I am very intrigued by the data presented in the Supporting Info to corroborate the claims regarding the bulk reaction mechanism, since this data, not yet accessible, opposes several previous...
01 February 2015 2,371 3 View
In regarding to use of Nb2O5 in lithium ion batteries.
01 February 2015 3,041 2 View
Several lithium salts are very soluble in carbonates and the resulting conductivities of around 10 mS/cm are adequate for batteries. Also, some carbonates clearly decompose at carbon anodes to...
31 December 2014 2,398 10 View
Any reference to theory and companies that offer services which have proven to be effective?
31 December 2014 3,277 2 View
Is there any document including the real-world investment costs of utility scale energy storage systems?
31 December 2014 2,659 4 View
We currently need to buy an ultrasonic metal welder for electric vehicle battery tab welding. The materials we need to weld are 2 layer of 0.2mm Al to 1.7mm Al extrusion, and 2 layer of 0.2mm Ni...
31 December 2014 5,117 3 View
This is to improve the quality of the slurry.
11 December 2014 8,055 3 View
When charging Li ion battery using 1C current upto the maximum potential of 4.2V, is it important to hold at that maximum cut-off potential for the battery to reach 100% SOC? If this is true,...
11 December 2014 1,265 4 View
Faraday efficiency is defined as ratio of observed cell current to estimated theoretical current. I am looking for Faraday efficiency of various fuel cells.
11 December 2014 7,335 0 View
Nafion is widely studied for the application in fuel cell. There are a few publications reported the use of Nafion in Lithium battery and Sodium battery. Using Nafion in non-aqueous may create...
11 December 2014 5,750 3 View
I am working on supercapacitors and using NaOH as electrolyte but I am facing some problem while using NaOH electrolyte. Can anyone please tell me what are the other electrolyte I can use to check...
10 November 2014 3,702 8 View
If a rechargeable sodium-ion battery with good performance characteristics could be developed, it could have the advantage of using electrolyte systems of lower decomposition potential due to the...
09 October 2014 7,029 2 View
In a metal air battery, metal works as the anode while oxygen works as the cathode. What is the role of the catalyst then and how does it work in a metal air battery?
09 October 2014 8,193 3 View
We have a battery smart charger and discharger that produces a very harmonic grid. We use the capacitor bank but after few time the capacitor fails. Can anybody help me with a design filter?
09 October 2014 4,481 3 View
If I want to feed a load with higher instantaneous demand from a battery i.e. with high rate of discharge, then what are the things to be kept in mind while designing such a battery load system...
09 October 2014 2,499 7 View
I just need a device we can buy and include in circuit. Like if we are running a device with 12V from P.S, and that cuts off, it switches to battery.
09 October 2014 6,336 6 View
Hi everyone, could anyone advise on this? I wonder if polymer electrolyte is applicable to Lithium sulfur or Lithium air batteries because these are less studied and reported?
08 September 2014 6,710 3 View
Our group is currently conducting research on different rechargeable batteries, including Li-ion, Li-polymer and Ni-MH, to develop a robust battery management system for transportation...
08 September 2014 7,153 1 View
The specific theoretical capacity of titanium dioxide is 330 mAh/g. If we are using titanium dioxide nanotubes of amorphous and anatase phase in Lithium Ion Battery. Can I use theoretical specific...
07 August 2014 658 3 View
For the lithium battery test : My sample add in the PVDF 5%, and then slip casting on the copper or aluminium show the picture. I do not know why. Perhaps the binder is not very viscous.
06 July 2014 4,980 3 View
The charge density at OHP moves relative to stable metal charge density under the applied pressure attributed to streaming current.
06 July 2014 3,119 1 View
Lithium intercalates well in silicon and the integrity of the electrode is maintained even after several charge/discharge cycles but does lithium metal react with extremely dry fumed/pyrogenic silica.
06 July 2014 8,570 3 View