Review and cite BATTERY protocol, troubleshooting and other methodology information | Contact experts in BATTERY to get answers
6,614 views 446 posts
Questions related to Battery
Just out of curiosity, is there anyone current working on materials for cathodes for lithium ion batteries that exceed 5V vs Li?
05 April 2019 6,791 5 View
my dc-dc converter input from the battery has a wide voltage range (8-30vdc)
04 April 2019 3,142 3 View
I have been studying the Lithium-ion battery. I have decided to stack 9(3*3 refer fig.) cells of lithium-ion battery in a cubic shape and trying to predict temperature, voltage of middle cell in...
01 April 2019 4,957 2 View
after model the elctrode material on DFT how we can tell about that this electrode material has chrging and discharging time cycle and also life time of battery electrode material mean how many...
23 March 2019 3,024 2 View
I am doing a project based on demand side management of DC grid system by Soc of battery. Currently I am stuck in Soc estimation practically in lab using coulomb counting. Does anybody knows,...
20 March 2019 885 3 View
Which is the simple model i can use to simulate li-ion battery charging circuit in cadence virtuoso (transient analysis) ADL simulation? I just want to use a battery as my load as my circuit...
20 March 2019 8,778 1 View
There are many alternatives of Li-Ion batteries such as Na-Ion, K-Ion, Hydrogen Fuel Cells, Zinc based RFBs etc. But like lithium what is the most promising alternative source of electric energy...
18 March 2019 9,739 3 View
Hi all, I want to calculate the capacity of a proton battery (Q=Itplateau). However, my discharge curve has no plateau. Is it possible if I assume that t=overall discharge time?
26 February 2019 3,509 4 View
I need a rough copper surface for good adhesion as a conductive substrate. Copper foil thickness is about 20 microns.
26 February 2019 9,390 5 View
I've read a jornal about rechargeable aluminum battery with CMK-3 cathode and I don't understand why they have to measurement EIS for performance measurement A super-long life rechargeable...
24 February 2019 5,718 4 View
What variant of building a hybrid battery would be the most optimal for a drone with a range of up to 50 km and a duration of up to 100 minutes?
22 February 2019 470 1 View
Dear all, I have some ibuttons for temperature measurement which have been stored for several years. Before I use them for field work, I would like to know Is there any way to measure if the...
11 February 2019 7,933 3 View
Please list down the best best Scientists/Researcher in the field of Solid State Electrolyte/Solid-state batteries for Li/Na-ion batteries.
04 February 2019 651 6 View
From what I saw from other people's researches sometimes Battery is connected to DC bus using Bidirectional DC-DC converter. From DC bus power from battery and PV is connected tothe grid by going...
23 January 2019 1,795 3 View
Hi. I'm a student studying Li-S battery. I'm trying to use a 2032 coin-cell How much diameter should i consider when punching a cathode slurry? I wonder if it should be smaller or larger than...
21 January 2019 2,126 3 View
And it withstand the temperature of 500 degree centigrade.can u give best insulation materials.
18 January 2019 276 2 View
i am looking for an affordable easy modeling tool for li-ion batteries, preferably for the engineering side of the battery.
10 January 2019 8,097 2 View
For example MoSe2, i know you can use Faraday's equation but it does not take into account anything about the intercalaction species such as Li, Ka, Na.
10 January 2019 881 2 View
I am trying to increase the sulfur loading of my cathode using the doctor blade technique. I have no problem to achieve loadings of 1-2 mg/cm2, but i am not able to reach higher...
03 January 2019 6,957 2 View
For future EV design, I have tentatively chosen 0.157 kWh per kg. for energy density of the battery pack. Am I aiming too low for a vehicle likely to reach production in five years? Or, is my...
28 December 2018 2,508 1 View
Carbon cloth/carbon fabrics may expose to washing, mixing, hydrothermal and/or high temprature treatments and and consequently they fraying easily. How can i prevent them fraying? Or is there...
20 December 2018 7,250 4 View
What is the relation between state of charge of battery and its output power? In constraint handling ...
19 December 2018 4,924 5 View
Hi, I need some advise regarding assembly of coin cell CR2032 batteries. I encountered problem with finding good tool for cutting fine shape battery electrodes. I noticed cheap hammer hole punch...
13 December 2018 7,463 3 View
I want to know about the difference as I don't understand what these parameters mean in real world application of the batteries
10 December 2018 6,178 11 View