Review and cite BATTERY protocol, troubleshooting and other methodology information | Contact experts in BATTERY to get answers
2,789 views 397 posts
Questions related to Battery
PAA is usually taken as a model for binder material for Si anodes. Is there any other material that can be used instead of PAA?
22 April 2019 5,160 3 View
The charge discharge curves of a battery intersect at a particular value of voltage. As number of cycles increase, this intersection voltage changes. What is the significance of its value?
21 April 2019 4,647 3 View
I am making Li-ion battery anode with slurry method with 8:1:1 ratio(TiO2: Carbon Black: PVDF). My active mass is 1.54mg with Cu as current collector. Cathode is regular commercial (made with...
11 April 2019 9,191 3 View
In various lithium batteries researchers use different current densities for measuring the capacity of a battery. What is the basis of their decision ? Is it just about the devices they use or...
10 April 2019 2,413 2 View
I have two systems lets system A & system B, System A which is a well known system and working fine enough to rely on. I took Impedance plot of a 4-Cell Pouch battery module with system A and made...
04 April 2019 3,519 3 View
Just out of curiosity, is there anyone current working on materials for cathodes for lithium ion batteries that exceed 5V vs Li?
04 April 2019 6,758 5 View
my dc-dc converter input from the battery has a wide voltage range (8-30vdc)
03 April 2019 3,111 3 View
I have been studying the Lithium-ion battery. I have decided to stack 9(3*3 refer fig.) cells of lithium-ion battery in a cubic shape and trying to predict temperature, voltage of middle cell in...
31 March 2019 4,926 2 View
after model the elctrode material on DFT how we can tell about that this electrode material has chrging and discharging time cycle and also life time of battery electrode material mean how many...
22 March 2019 2,999 2 View
I am doing a project based on demand side management of DC grid system by Soc of battery. Currently I am stuck in Soc estimation practically in lab using coulomb counting. Does anybody knows,...
19 March 2019 829 3 View
Which is the simple model i can use to simulate li-ion battery charging circuit in cadence virtuoso (transient analysis) ADL simulation? I just want to use a battery as my load as my circuit...
19 March 2019 8,731 1 View
There are many alternatives of Li-Ion batteries such as Na-Ion, K-Ion, Hydrogen Fuel Cells, Zinc based RFBs etc. But like lithium what is the most promising alternative source of electric energy...
17 March 2019 9,692 3 View
Hi all, I want to calculate the capacity of a proton battery (Q=Itplateau). However, my discharge curve has no plateau. Is it possible if I assume that t=overall discharge time?
25 February 2019 3,462 4 View
I need a rough copper surface for good adhesion as a conductive substrate. Copper foil thickness is about 20 microns.
25 February 2019 9,355 5 View
I've read a jornal about rechargeable aluminum battery with CMK-3 cathode and I don't understand why they have to measurement EIS for performance measurement A super-long life rechargeable...
23 February 2019 5,681 4 View
What variant of building a hybrid battery would be the most optimal for a drone with a range of up to 50 km and a duration of up to 100 minutes?
21 February 2019 435 1 View
Dear all, I have some ibuttons for temperature measurement which have been stored for several years. Before I use them for field work, I would like to know Is there any way to measure if the...
10 February 2019 7,871 3 View
Please list down the best best Scientists/Researcher in the field of Solid State Electrolyte/Solid-state batteries for Li/Na-ion batteries.
03 February 2019 624 6 View
From what I saw from other people's researches sometimes Battery is connected to DC bus using Bidirectional DC-DC converter. From DC bus power from battery and PV is connected tothe grid by going...
22 January 2019 1,752 3 View
Hi. I'm a student studying Li-S battery. I'm trying to use a 2032 coin-cell How much diameter should i consider when punching a cathode slurry? I wonder if it should be smaller or larger than...
20 January 2019 2,083 3 View
And it withstand the temperature of 500 degree centigrade.can u give best insulation materials.
17 January 2019 235 2 View
i am looking for an affordable easy modeling tool for li-ion batteries, preferably for the engineering side of the battery.
09 January 2019 8,060 2 View
For example MoSe2, i know you can use Faraday's equation but it does not take into account anything about the intercalaction species such as Li, Ka, Na.
09 January 2019 843 2 View
I am trying to increase the sulfur loading of my cathode using the doctor blade technique. I have no problem to achieve loadings of 1-2 mg/cm2, but i am not able to reach higher...
02 January 2019 6,911 2 View