Contact experts in 3D to get answers
2,158 views 1,609 posts
Questions related to 3D
for example, calculate the percentage of welding nugget elements AISI 304 to carbon Steel thanks for your attention.
22 February 2023 5,271 0 View
We have staphylococcus aureus bacteria treated with ciprofloxacin attached to a gold nano-particle with a radio-labeled chelator. we want to measure the antibiotic conc uptake by bacteria, what...
16 February 2023 389 1 View
we are tried all different concentrations of polymer (Polysulfone) and solvents (NMP & DMF) to synthesis FO membrane. but unfortunately every time polymer penetration occurs across the fabric...
15 February 2023 5,232 1 View
I am currently working on totally new undiscovered composite fiber. For that I am need young modulus shear modulus poisson ratio. So, anyone tell me how I can possibly find this data (which test...
25 January 2023 1,670 1 View
I would like to know some research works on showing the difference between ultra short-term and short-term and long-term forecasting of renewable generation and load demand. Particularly...
21 December 2022 5,839 2 View
Is this possible to make a gerber file from CST MES student edition?
14 December 2022 8,246 0 View
I have doubts whether to remove the water molecules from the pdb before docking, since, when checking the molecule by autodock tools, I get an alert that all the molecules that are not attached to...
22 November 2022 357 4 View
I am going to work with two-photon microscopy at low intensities (~0.5 W/cm^2 per pulse on sample) with 160 fs pulses @950 nm. I'm looking for sensitive probes capable of showing two-photon...
11 November 2022 9,659 0 View
Which kinds of these cells (HFF or HDF) are better for wound healing research ?
30 October 2022 1,060 1 View
Update failed for the Solution component in Fluid Flow (CFX). The solver failed with a non-zero exit code of :2
02 October 2022 6,548 3 View
the wall thickness option in this picture isn't shown in the version that I have.
24 September 2022 1,087 1 View
I wanna ask what are the conditions favorable for transmitting energy when we have Soil over Limestone or when we have Water over Sandstone for instance and someone is shooting from Soil or Water...
17 September 2022 3,559 3 View
Hi all, Tried adding 10ml 100mg/ml sterile filtered doxycycline to DMEM + normal FBS from Gibco to get around 2g/L and I got a precipitated mess. What am I doing wrong? Should I add doxycycline...
12 September 2022 3,070 2 View
I use electroplating to deposit Cu on Si wafer already seeded with thin Cu layer. Then I pattern it with insulating polymer and dip in electroplating bath. out of multiple copper seeded surfaces ,...
07 September 2022 3,665 1 View
I know that the Esec modulus is a percentage of the Youngs modulus (0.7E or 0.85E). Please explain in detail? Thank you
06 September 2022 1,223 2 View
Idiopathic chondrolysis of the hip (ICH) initial or early stage is usually managed by medical treatment and physiotherapy, I would like to ask about the medical protocols that you follow and their...
03 September 2022 9,283 2 View
Hi everyone I have a 3-level structure, it tells me that I have an error in the LOAD CASE with an earthquake in the X direction, but I defined it as an acceleration. What would be the error...
01 September 2022 2,133 0 View
I am studying the binding of a new ligand with a protein. Can anyone guide me to select the modeling (independent, multiple site, sequential three site, sequential two site) to analyze the ITC...
28 August 2022 727 3 View
i wanna find texture coeffient but i dont know how i can find the number of diffraction and total number of reclection, thanks for your answer
20 August 2022 7,925 2 View
I'm going to purify 99% P2S5 (Phosphorus pentasulfide) or P4S10. In order to purify the material, I'm gonna use a vacuum sublimation apparatus. I would like to know what would be the optimum...
12 August 2022 7,839 0 View
Hi, I was wondering whether to use Minitab or Design Expert to design the experiments for my study. There is an option in Minitab 18 -> Stat -> DOE -> Response Surface -> Response...
09 August 2022 2,781 1 View
I have both geotiff and ascii data, but not quite sure yet which is easier to use, and how to upload and visualize bathymetry properly in Petrel. Appreciate any tips!
01 August 2022 4,021 3 View
We understand that engineers don't control structural performance, but nature does. Performance-based Design is only an expectation with little to no Physical basis. Do we have any actual cases?
25 July 2022 8,674 0 View
Hi everyone, I urgently need your help with a problem with some tomato Moneymaker plants growing in a growth chamber, under artificial light. In the last days, the leaves of all the plants have...
25 July 2022 4,370 6 View