Contact experts in 3D to get answers
1,123 views 1,031 posts
Questions related to 3D
Hello, I normally stain 12-micron cryosections for pancreas tissue (looking at insulin and glucagon expression). I would like to try staining 50 micron sections for confocal microscopy. Do I...
28 August 2021 4,505 0 View
Dear All, I wonder if there exists any 3-dimensional representation of a spiral (e.g., prime number spiral)? Here is, what I mean: In 2D, a spiral is an ordinary object. E.g., a spiral of...
27 August 2021 7,317 2 View
I plan to conduct IF confocal microscopy of fixed and live cell experiments. I have used Poly -L- and -D- lysine (PDL). PDL lysine seems to work but I am still observing toxicity. Are there any...
26 August 2021 530 4 View
I'm trying to stain spheroids embedded in alginate- gelatin hydrogel using mitochondria probe (not Immunostaining). However, I'm getting very high noise and very low signal with this dye...
25 August 2021 238 6 View
I have a data set in 3D space which is recorded as X, Y and Z. I applied FPCA for X, Y and Z variations separately. Is there any possibility to apply FPCA to 3D data as once the means (X, Y,Z) as...
23 August 2021 5,895 1 View
Hello everyone, what softwares are best for making a 3D plot that can be used for publications. I am looking at paraview and origin. If anyone can put me through, I will appreciate that. Note: My...
23 August 2021 2,713 3 View
I want to model a moving concentrated force to simulate the moving wheel load on the pavement in a simplified way as shown in the attachment. So, is there any way to model the moving concentrated...
18 August 2021 2,920 3 View
after completing the batch processing of my data in pymca my 3D image has become 2D and splitted into half.how do i merge left half of the image into right half and bring it back to 3D? (image on...
17 August 2021 7,406 3 View
Hi everyone I have design a 2x14 array by using HFSS 3D module and then exported the designed as dxf format and imported it in HFSS layout. When I compare both results they are very much...
17 August 2021 7,564 3 View
I'm currently attempting a 3D FDTD simulation where I'm modeling a plasma as a dielectric tensor based off a frequency dependent Appleton Hartree dispersion relation. The inversion of the...
31 July 2021 4,544 3 View
I want to model the moving load acting on a single beam in Abaqus. But I can't do it well. Every time I check the data, I get the error message "Surfaces which include edges cannot be used with *...
28 July 2021 949 13 View
My attempt was that I created 2 Reference Points at the centers of the two base of the cylinder and made a wire between them. Using that wire, I made a planar connector. But when I Provide...
23 July 2021 3,952 1 View
Hello there, Can someone recommend me that how can i reconstruct a 3d images using a stack of images? Please Guide me in this regard. Thanks in Advance
22 July 2021 3,643 5 View
I am doing a research which is required to do simulation for ground improvement using FLAC3D, but i am a novice to this software, can anyone help me with the code that i can use to do the...
13 July 2021 1,673 3 View
I have two images attached, there is an image with white lines used to make stonewalls, and another image has no lines. I would like to know how to draw those lines using either Autocad,...
17 June 2021 5,683 3 View
Specifically how do i make 3D structure adhered onto the glass surface without losing its structural integrity?
16 June 2021 889 6 View
for a project I want to create a 3D CAD model of the child's chest.
13 June 2021 8,962 3 View
Hello, Can you please tell me if I need to break the 3D bioprint structures containing the cells first before adding the CellTiterGlo kit so that the reagent can penetrate and lyse the cells...
11 June 2021 4,268 2 View
Is there any mechanism to combine ERT Profiles with known coordinates to integrate with high-resolution surface Imagery derived from Photogrammetry ? I think this can help to better understand the...
09 June 2021 4,772 4 View
the bearing capacity from hardening soil method and mohr-columb method is higher than theoretical method of Meyerhoff and Hansen method
31 May 2021 6,362 6 View
Hello, I am struggling with the fabrication of composite microneedles (Silk tip / PVA or PVP pedestal). Issues 1) How to remove the silk residue on the PDMS after pouring the silk solution? 2)...
30 May 2021 1,738 0 View
I'd like to ask where I can find a free version from Plaxis 3D? or any alternative software Please, if anyone can help me to provide me the free version I will appreciate that so much Thank you
27 May 2021 4,895 9 View
I'm looking for a quantifiable way to visualize cell-cell contacts in a 3D spheroid. So far, my stainings have somehow worked, but not to my fullest satisfaction (blurry, uneven staining of core...
27 May 2021 2,770 2 View
I am using Abaqus for a project where I am modeling air propagation through buildings. I am using a 3D Eulerian domain (Eulerian elements) to represent air. I have also been trying to use adaptive...
20 May 2021 4,921 3 View