Statistics, Calibration Strategies and Data Processing for Analytical Measurements

Pittcon 2024, San Diego, CA, USA (Feb 24-28, 2024)

Time: Saturday, February 24, 2024, 8:30 AM to 5:00 PM (Full day course)

Short Course: SC-2561

Presenter: Dr. Nimal De Silva, Faculty Scientist, Geochemistry Laboratories, University of Ottawa, Ontario, Canada K1N 6N5

Email: [email protected]

Abstract:

Over the past few decades instrumental analysis has come a long way in terms of sensitivity, efficiency, automation, and the use of sophisticated software for instrument control and data acquisition and processing. However, full potential of such sophistication can only be realized with the user’s understanding of the fundamentals of method optimization, statistical concepts, calibration strategies and data processing, to tailor them to the specific analytical needs without blindly accepting what the instrument can provide. The objective of this course is to provide the necessary knowledge to strategically exploit the full potential of such capabilities and commonly available spreadsheet software. Topics to be covered includes: Analytical Statistics, Propagation of Errors, Signal Noise, Uncertainty and Dynamic Range, Linear and Non-linear Calibration, Weighted versus Un-Weighted Regression, Optimum Selection of Calibration Range and Standard Intervals, Gravimetric versus Volumetric Standards and their Preparation, Matrix effects, Signal Drift, Standard Addition, Internal Standards, Drift Correction, Matrix Matching, Selection from multiple responses, Use and Misuse of Dynamic Range, Evaluation and Visualization of Calibrations and Data from Large Data Sets of Multiple Analytes using EXCEL, etc. Although the demonstration data sets will be primarily selected from ICPES/MS and Chromatographic measurements, the concepts discussed will be applicable for any analytical technique, and scientific measurements in general.

Learning Objectives:

After this course, you will be familiar with:

- Statistical concepts, errors relevant to analytical measurements and calibration.

- Pros and cons of different calibration strategies.

- Optimum selection of calibration type, standards, intervals, and accurate preparation of standards.

- Interferences, and various remedies.

- Efficient use of spreadsheets for post processing of data, refining, evaluation, and validation.

Access to a personal laptop for the participants during the course would be helpful, although internet access during the course is not necessary. However, some sample- and work-out spreadsheets, and course material need to be distributed (emailed) to the participants day before the course.

Target Audience: Analytical Technicians, Chemists, Scientists, Laboratory Managers, Students

Early Fee (before Jan 18, 2024)

$900.00

Full Fee (after Jan 18, 2024)

$1100.00

Register for Pittcon: https://pittcon.org/register