03 December 2018 4 10K Report

I want to perform some radio labeled transfer assays using Carbon 14 labeled amino acids. I know some sources e.g., PerkinElmer, Moravek for radioactive chemicals. If you know any other please let me know.

Thanks in advance!

More Manesh Nautiyal's questions See All
How is solubility of CO2 or air in organic solvents such as xylene or cyclohexane?

For some reason, I need to inject a dispersion of an organic solvent and organoclay into a block of soil sample. the organic solvent probably is xylene.

29 September 2020 6,348 4 View

What is the best solvent to dissolve nanoclay (montmorillonite)?

I need to inject nano-clay to some kind of collapsible soil (silty loess) to stabilize and strengthen it. I can't use water since this soil is moisture sensitive and water may dissolve the bonding...

26 March 2020 1,675 3 View

Can anyone explain me how to make 5% DMSO solution?

I want to make 5% DMSO solution for my substrate such as Fatty acids and naphthalene to dissolve.

04 April 2019 2,311 6 View

Protocol for extraction and derivitization of fatty acid for GC analyis?

I want to extract my P450 reaction mixture and derivitized for GC analysis. I have read about BSTFA method, but i have no idea about the procedure. Please help me to understand the procedure.

26 January 2019 7,689 11 View

Himalayan Black Salt?

Its origin, antioxidant property?

23 January 2019 1,526 3 View

How to fuse two independent domain?

I have two independent domain cloned in E.coli and i want to fuse them both just to get a single domain by PCR. How to get this by PCR?

10 October 2018 1,718 4 View

Facing problem in Cloning?

facing problem in cloning.No colony in transformants plate.

19 August 2018 6,226 9 View

How to extract the cytoplasmic content from human cells ?

Dear all, I want only cytoplasmic content from the human cells to test my compounds. Does anyone knows how to do it or can share the protocol for doing it ?

29 June 2018 9,042 2 View

How I can measure the contraction and expansion of graphene nano particles reinforced in Copper matrix composite?

I have sintered Copper matrix composite which is reinforced by graphene, since graphene shows negative thermal expansion upto a certain temperature and copper shows positive thermal expansion...

04 February 2018 7,835 1 View

What is the effect of CuAl2O4, CuMo2S3 and AlB12 compounds on the Tribology of Copper matrix composite?

During XRD i found the peaks of CuAl2O4, CuMo2S3, AlB12 compounds and i want to know the effect of these compounds on tribological properties of Copper matrix composite during dry sliding. Plz...

16 November 2017 307 2 View

Similar questions and discussions
Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

RIA. How to measure?

When you use RIA, with a control the unknown sample with antibodies, you bare in mind the binding sites of the antibodies. However you still need to measure labelled antigen (radioactive) and not...

28 February 2021 2,133 3 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

How to evaluate unsupervised clustering metrics when some elements do not have a cluster label in the result?

I run algorithms like HDBSCAN and MeanShift, and compare them with K-means and GaussianMixture. The first two algorithms do not return cluster labels for some elements in the dataset. My question...

27 February 2021 428 3 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close