Is it possible to functionalise PEG in ATP system?

More Senthilkumar Rathnasamy's questions See All

Prediction and quantification of water content ?

Hi all. Is it possible to correlate multiple parameters like fruit weight, color, length and diameter, its ratio with water content in coconut ?. Need some guidance on some non destructive methods...

23 July 2024 9,421 3 View

Dimensions of radiation box in HFSS?

I am designing a patch antenna using coax feed in HFSS. I read in posts that dimensions of radiation box should be more than lambda/4 from the edges of the radiating structure. So I did like that...

17 January 2023 9,053 7 View

What impact does the solution frequency has in HFSS?

I am designing a patch antenna with coax feed for 3GHz frequency. While assigning radiation box the height of the box needed to be assigned I found it should be above lambda/4 which was around...

06 January 2023 541 4 View

How to add an Infinite ground plane in CST?

My professor asked me to replace normal ground plane with infinite ground palne and compare between them for a patch antenna. I don't know how to add a infinite ground plane in CST can somebody...

21 December 2022 6,840 3 View

What curing agent can I use to mix with the base elastomer to prepare PDMS sheets?

Actually I have PDMS, it clear and highly viscous in nature, so what can I mix with it to mould them to sheets of 0.5mm thickness. Please also let me know the method that I can use for curing.

10 May 2022 9,600 3 View

How to use potassium silicate or sodium silicate in powder form for geopolymer concrete ? Which article or research paper to study for mix design?

Geopolymer concrete research by using Na2sio3 or k2sio3 powder

01 January 2022 6,330 3 View

Impedance matching of a low frequency antenna ?

I designed a antenna working at MHz range. I got -10 db impedance bandwidth for certain range of frequencies. In that range of frequencies I got a spike in impedance bandwidth for -2db. I tried...

25 October 2021 8,732 4 View

Are there any fluorocarbon oils with a refractive index greater than 1.3?

Hello fellow researchers! I am trying to find a fluorocarbon oil that has a refractive index same as or greater than that of water (1.33). The closest one I can find so far is 1.3 (FC-170).

02 May 2021 561 1 View

Electro chemical machining availability?

I need to do ECM process on metal matrix composites. where i can do it? any one suggest me.

13 February 2019 1,297 4 View

Whether "lattice parameter" and "lattice constant" are refering to same constants like a,b,c in crystals?

In crystal structures, the lattice constants are defined as "a", "b" and "c". In few literature(s), the "lattice parameter" is used. Are they same?. Is there any difference?.

27 January 2019 7,437 4 View

Can I proceed with Response Surface Methodology (RSM) with only one factor for further optimization?

I went for Plackett Burman Design for selecting the optimization factors of growth conditions for pesticide degradation. I started with 7 parameters. But, after the experiments and analysis, only...

29 July 2024 5,015 1 View

I did hirshfeld surface analysis for molecule but did not find red spot and interaction surface in energy frame work, is it ok for research article ?

In hirshfeld surface calculation i did not find any red spot in hirshfeld surface, is it ok for research article to write?

28 July 2024 2,988 0 View

Why specific capacitance is not proportional with the specific surface area?

Dear researchers, Why specific capacitance is not proportional to the specific surface area? I have material A with a surface area higher than material B, but material B is showing little bit...

26 July 2024 9,156 2 View

How can microbial engineering techniques be used to enhance the functionality and efficacy of probiotics ?

through genetic modification or metabolic engineering? Is it helpful, good for health ?

22 July 2024 7,811 4 View

Differences between Surface Tension and Interfacial Tension in Liquid-Gas Phases?

Hi everyone, I have a question regarding surface and interfacial tension. Although I understand that these tensions are studied for different purposes, can they be considered equivalent in the...

18 July 2024 382 5 View

How to carry out survival analysis of a one time use machine which is stored and tested at regular intervals for functionality?

I want to carry out reliability study of a machine with various sub components both electrical and mechanical. The machine is a one time use (similar to a decoy or rocket) and is stored at...

30 June 2024 2,435 0 View

Roughening Silver Electrode Using CH Instruments for SERS applications?

I am in the process of roughening a silver electrode for SERS measurements using the latest version of CH Instruments. Most procedures in the literature mention sweeping the potential from -0.3 V...

30 June 2024 4,639 3 View

How closely does an elastic sheet conform to what's below it?

See the attached file for an illustration of this problem. Consider an elastic sheet S (orange) that’s laying atop a solid base B (blue). The sheet is under tension (arrows) and is held to the...

30 June 2024 747 4 View

What kind of surface morphology must be there for good photocatalytic activity of thin film?

If I want to increase the photocatalytic activity of a thin film sample what should be it's ideal surface morphology and parameters? All scientific answers related this are highly appreciated.

19 June 2024 6,744 0 View

What surface modification procedures can be employed to enhance the interfacial bonding between the resin matrix and filler particles in dental compo?

What surface modification procedures can be employed to enhance the interfacial bonding between the resin matrix and filler particles in dental composites?

12 June 2024 9,363 1 View