Hi everyone,
I want to mesh a part in Abaqus for further use in ANSYS Fluent because this way, it is much easier and faster to get a high-quality mesh. Is it even possible to generate a file that could be read by Fluent?
PS. I have already tried Gambit but would rather use Abaqus, in case it is viable.
Thank you for your time,
Majid
I have never done it. You can easily try it. Fluent accepts these input formats from Abaqus: https://www.afs.enea.it/project/neptunius/docs/fluent/html/ug/node99.htm#file-import-abaqus
Shayan Davani
Hi dear Shayan, Thank you for your reply. Based on the link you provided, I imported the Abaqus *.inp file to Fluent and it worked! Thanks for your help
For those who have the same problem:
In case you want to prepare an inp file in Abaqus for Fluent, you need to add your part to the assembly module and for each boundary condition that needs to be specified for your CFD model, create a geometry set in assembly.
- Badges
- Science topic