Dear Sir,

CATIA is basically designed for three dimensional modelling. Sketches we create in it are only to convert it into 3D models. After creating a 3D model we can go for drafting of that component (auto generated in first OR third angle projections) with all dimensions.

Here are some video links which may help to solve your problem

https://www.youtube.com/watch?v=Zy1HFiraQQQ

https://www.youtube.com/watch?v=BIWuf9QI73o

Regards,

Avinash T. Panchal

Press ctrl+P for the printing the 2d sketch. It shows with dimensions like a drafting file. Then you can save it as a pdf.

Dear Rahul Agarwal

Thank you...Its working.

Im a little bit late but here's my answer anyway!

You can also create a pad to make the sketch a 3d object.

then click:

Then Save as CAD Drawing file to be able to edit it later in catia, or save as PDF for printing.

Right Click "Sheet.1" To modify the size of the paper or the scale.

In properties of the view, show 3d wireframe

drafting will accept sketches if you just check the box "Project 3D wireframe" under Tools -> Options -> Mechanical Design -> Drafting -> View

After that, create a new drafting, click "Front View" and select the plane that your sketch is inside it.