Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Does anyone use antinuclear antibody (ANA) and anti-Phospholipid antibody ELISA kit for Non Human Primate serum samples?

I am looking for anti-nuclear antibody (ANA) and anti-Phospholipid antibody ELISA kit for Non Human Primate serum samples. Any suggestions highly appreciated. Thank you.

28 February 2021 6,512 3 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

What is Flat Lens Antenna?

28 February 2021 5,433 3 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View

Helix antenna coupling problem?

Dealing with a helix antenna, made with flexible material and not rigid like using a PCB board or wire. At the beginning of the helix is too close to the ground plane, causing coupling. How can I...

21 February 2021 4,453 3 View

Which method need to be used to predict crack propagation?

Need to predict the crack propagation phenomenon in a CI component. Suggestions are needed regarding the the methods ( XFEM, J integral, etc.,) which will predict the crack propagation behavior...

06 February 2021 1,936 4 View

How to solve 1-D Wave equation?

Good day, In standard PDE literature, there are a lot of solution approaches for the 1-D wave equation initial-boundary value problem. One way is with separation of variables. Below I describe...

25 January 2021 4,876 3 View

What do you mean by 'excitation' of a plasma wave? What is the physical significance of this 'excitation'? Why is it necessary?

I have read numerous research papers on various mechanisms of excitation of surface plasma wave. But why do we need to excite a wave? Is it necessary? Can't the wave propagate without being excited?

25 January 2021 3,790 3 View

I am working with crack propagation along with delamination using ABAQUS. Wether crack will start from a delaminated portion (cohesive crack) by XFEM?

I am modelling a SENB Beam with an interface. The interface is modelled with cohesive elements to permit delamination. The carck in the continumm is taken care by the XFEM. My doubt is the crack...

19 January 2021 4,827 1 View

What type of spectral radiation has greater penetration on materials, UV or IR? What book or source do you recommend for information on this?

I need information concerning the penetration and reflection capacity of ultraviolet and infrared radiation wavelengths on different most common materials. Edit. Can somebody recommend a book to...

16 January 2021 8,051 6 View

Is stabilizer good to use while designing an antenna using fabric?

13 January 2021 2,473 4 View

How to compute the refraction index for a 79.5GHz (3.8mm) FMCW Radar Instrument?

Dear everyone, I performed some experiements with a FMCW Radar Instrument emitting waves of 3.8mm. I can see some "movements" when I am looking on the relative displacements (+/- 0.15mm) over...

07 January 2021 2,073 6 View