I want to ask can i use Potentiostatic charge discharge instead of Galvanostatic for lithium ion battery measurement?

11 November 2017 0 2K Report

I have nova 1.10 software and no option for Galvanostatic charge discharge. Cathode is LiMnO2 , anode is Graphite and electrolyte i use is LiPF6 solution. if we can not use Potentiostatic then why? and how i set values for charging discharging? how i come to know what charge discharge value i used for my system? how we set cut off voltages? plz help me...

Badges
Science topic

More Madiha Sabeen's questions See All

Semiconductor oxides like ZnO, TiO2, etc. used as anode materials but why not used as cathode materials?

Semiconductor oxides like ZnO, TiO2, etc. used as anode materials but why not used as cathode materials? But coatings of cathode materials with semiconductor oxides were done.what is the reason?...

07 August 2019 6,242 4 View

Can anybody explain why very low scan rate (0.1mV/s or 0.2 mV/s) used in lithium ion batteries? as in supercapacitors where scan rate is 50mV or high?

I am working on Lithium Ion battery cathode materials, composite of O-LiMnO2/CNTs. ISsoxidation and reduction peaks depends only the cathode material or counter electrode?? Electrolyte is 1M LIPF6...

04 May 2018 2,112 0 View

I am trying to do cyclic voltammetry of O-LiMnO2 but there is no oxidation and reduction peaks i get .what should i do?

i am working on Li-ion batteries..my working electrode is O-LiMnO2 and counter+ reference electrode is Lithium metal foil and electrolyte solution is 1 M Lithiumhexaflourophosphate with EC and...

01 February 2018 8,585 2 View

How can i find Cryatalographic information file (CIF) of O-LiMnO2(pmnm,59)??

i am working on cathode material..

03 April 2017 7,866 4 View

How to do Cyclic voltametry of Thioglycolic acid to find band gap of TGA?

Hello everyone, I am trying to find the band gap of mercaptoacetic acid or thioglycolic acid using cyclic voltametry. Normally people use any electrolytic solution like potassium ferricyanaide and...

10 November 2016 9,968 4 View

Purification of CdSe quantum dots using ethanol?

Hello everyone!! I am synthesizing CdSe quantum dots using oleic acid and octadecene, synthesis is perfect with CdO being colorless within 20 minutes in the presence of octadecne and oleic acid...

09 October 2016 8,893 4 View

Can someone help me in understanding antibody structural changes under acidic or basic environment.?

Hi everyone, can someone help me in understanding the antibody behavior under different conditions. Does antibody structure opens up, exposing its amine group for bonding under basic conditions...

01 February 2016 9,241 0 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

How to dissolve cross-linked Amberlite IRC120 H, hydrogen form resin?

Hello all, I have used Amberlite IRC120 H, hydrogen form acidic cation-exchange resin for the ion-exchange of waterglass [sodium silicate solution -- 40% Sodium silicate (mol ratio > 3.2)...

21 February 2021 5,614 3 View

How to prepare electrolyte of NaClO4 salt for Na-ion battery? Any problem with this salt?

Hello, I am trying to make anode for Na-ion batteries. I have no experience with preparation of the electrolyte for any batteries. NaClO4 salt are available and I am planning to use EC:PC as...

21 February 2021 8,132 1 View

Where can the fault diagnosis data set of lithium battery be found?

Most of the data sets on the network only contain good information about the voltage and internal resistance of lithium batteries. The data of faulty battery is missing. Who can help me, I will be...

21 February 2021 8,659 1 View