Can anybody explain why very low scan rate (0.1mV/s or 0.2 mV/s) used in lithium ion batteries? as in supercapacitors where scan rate is 50mV or high?

05 May 2018 0 2K Report

I am working on Lithium Ion battery cathode materials, composite of O-LiMnO2/CNTs. ISsoxidation and reduction peaks depends only the cathode material or counter electrode?? Electrolyte is 1M LIPF6 with EC/DMC and counter electrode is Li-metal foil.

glassy carbon can also be used as counter electrode?

Badges
Science topic

More Madiha Sabeen's questions See All

Semiconductor oxides like ZnO, TiO2, etc. used as anode materials but why not used as cathode materials?

Semiconductor oxides like ZnO, TiO2, etc. used as anode materials but why not used as cathode materials? But coatings of cathode materials with semiconductor oxides were done.what is the reason?...

07 August 2019 6,242 4 View

I am trying to do cyclic voltammetry of O-LiMnO2 but there is no oxidation and reduction peaks i get .what should i do?

i am working on Li-ion batteries..my working electrode is O-LiMnO2 and counter+ reference electrode is Lithium metal foil and electrolyte solution is 1 M Lithiumhexaflourophosphate with EC and...

01 February 2018 8,585 2 View

I want to ask can i use Potentiostatic charge discharge instead of Galvanostatic for lithium ion battery measurement?

I have nova 1.10 software and no option for Galvanostatic charge discharge. Cathode is LiMnO2 , anode is Graphite and electrolyte i use is LiPF6 solution. if we can not use Potentiostatic then...

10 November 2017 1,940 0 View

How can i find Cryatalographic information file (CIF) of O-LiMnO2(pmnm,59)??

i am working on cathode material..

03 April 2017 7,866 4 View

How to do Cyclic voltametry of Thioglycolic acid to find band gap of TGA?

Hello everyone, I am trying to find the band gap of mercaptoacetic acid or thioglycolic acid using cyclic voltametry. Normally people use any electrolytic solution like potassium ferricyanaide and...

10 November 2016 9,968 4 View

Purification of CdSe quantum dots using ethanol?

Hello everyone!! I am synthesizing CdSe quantum dots using oleic acid and octadecene, synthesis is perfect with CdO being colorless within 20 minutes in the presence of octadecne and oleic acid...

09 October 2016 8,893 4 View

Can someone help me in understanding antibody structural changes under acidic or basic environment.?

Hi everyone, can someone help me in understanding the antibody behavior under different conditions. Does antibody structure opens up, exposing its amine group for bonding under basic conditions...

01 February 2016 9,241 0 View

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

Issues with Permeabilization during Flow Cytometry?

Hello Everyone. Currently I am working to characterize macrophages in the myocardium after ischemia-reperfusion injury in rats. Due to the low total cell number isolated from rat hearts I can...

01 March 2021 3,867 3 View

What do I do with DLS peaks that are from the buffer?

I'm looking at the aggregation of my protein sample using DLS. Unfortunately, my buffer (20mM HEPES) also results in a set of peaks. These are at approximately 1 and 1000 d.nm. The lowest peak...

01 March 2021 9,015 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How can I assign a velocity along one direction to CO2 molecules in a molecular dynamics simulation using GROMACS?

Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...

26 February 2021 10,014 3 View

What information can be had from raman at higher wavenumber?

i have recorded raman spectra of strontium oxide thin film. the spectra were recorded in the range 400 to 4000 cm-1. i have reference to peaks upto 1000cm-1. but i couldn't find literature for...

26 February 2021 2,499 1 View