How to transfer structrual result to fluent by FSI in ansys?

More Ankush Pratap Singh's questions See All

How to update material properties during the analysis in ansys?

I need to update the material property during analysis as per the stress coming in the element.

01 February 2020 7,956 3 View

I need to simulate two way fluid solid interaction using ansys fluent and ansys transient structure. can anybody suggest me how to do it ?

i know how to formalize the analysis using system coupling but i need some detailed knowledge about setting conditions and parameters to conduct the analysis.

11 December 2019 728 5 View

How to implement S-FEM smoothed finite element method in ansys for using meshless meshing?

i want to use smoothed finite element method for mesh-less meshing. So, i wantt to know how to use it in ansys?

11 December 2019 9,206 2 View

IS pinball radius influence the contact pressure magnitude in Ansys?

increase or decrease in pinball radius can cause in change in magnitude of contact pressure.

10 November 2018 9,797 0 View

Why my contact status changes from contact to no contact?

my contact status changes from contact to no contact in second sub-step of my analysis. In first sub-step contact is made and contact pressure generated but in next sub-step contact changes its...

10 November 2018 8,349 1 View

How cohesion parameter COHE effects the frictional stress in ansys for coulomb frictional module?

The frictional stress for coulomb frictional model is defined as sum of cohesion parameter and mu*contact pressure.

09 October 2018 5,810 2 View

Convex or concave surface which should be target, if both are in contact using ANSYS? R1 value is required or not?

Actually i am providing contact between concave surface and convex surface. As per manual, i uses concave surface as target surface and convex as contact. But an error with statement " Contact...

08 September 2018 4,602 0 View

How to get rid of contact chattering in ansys mapdl?

My simulation is not converging because of contact chattering value which i found is 1. I am using augmented Lagrangian method with FKN-1, PINB- 0.1, FKT-1, FTOLN- 1, RESULTING PENETRATION...

08 September 2018 9,169 1 View

How to successfully translate one body in between load steps to make assembly with other body in ansys ?

i want to make assembly of cylinder and open ring (as shown in attachment) to find out the pressure exerted at the cylinder surface when ring mounted over it. Diameter of ring is less than...

07 August 2018 9,749 0 View

How to model unloading in terms of displacement loading?

I need to expand one horse shoe shape geometry. I give displacement loading at its both end to expand the gap between two ends. I used loadstep file to perform this Loadstep 1 Time,1 i selected...

07 August 2018 7,876 3 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

Arena simulation - how do i model the following model in ARENA (see description) (new to ARENA)?

Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...

02 March 2021 2,431 3 View

Is there any test to determine the cardiovascular risk of patients with obesity? from the perspective of obesity?

We found tests to determine cardiovascular risk taking into account lipid profile, blood pressure, age, history of diabetes, other laboratories. But when weight is involved, there is a paradox. I...

02 March 2021 6,036 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

What SPSS analysis should I run with one IV (with two levels) and two DVs?

Hi, I am trying to figure out which test would be most appropriate to run for the following question: Is there a difference in task blood pressure between smokers and non-smokers? There are two...

01 March 2021 8,235 2 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

Arun Patil

Dear Mr. Ankush ,

If you might have already solved the structural analysis results. Drag the fluent project module and drop it on the solution part of structural. You will be able to get connected to Fluent or CFX and continue with the future work.

Ankush Pratap Singh

Thanks Mr. Patil,

My work requires first doing fluent analysis then transfer fluent results to structural and again i need to transfer the results of structural to fluent in order to see the effects of structural properties on dynamics of fluids.

So can you please suggest me regarding this ?

Vikas Kannojiya

Try to solve the problem by using "System Coupling". I think this video tutorial can be helpful.

https://www.youtube.com/watch?v=9aHWSZghFn8