I have model of a bone having open lattices,I want to find the youngs modulus of the lattice model nd also perform fatigue tests.How can this be done through software?
he calculations from Young’s modulus depends on the applied force, the type of material and the area of the material. The stress of the medium relates to the ratio of the applied force with respect to the cross-sectional area. Also, the strain considers the change in length of a material with respect to its original length
You should feed the basic materials properties to the software. You can perform experimental tests or find them from literature. If you have them and you need to find the properties for the system you need to apply force and calculate the deformation. Use the deformation to calculate the strain and the force to calculate the stress. E=Stress/Strain. For fatigue you will need at least the sn curve for the basic materials.
You should feed the basic materials properties to the software. You can perform experimental tests or find them from literature. If you have them and you need to find the properties for the system you need to apply force and calculate the deformation. Use the deformation to calculate the strain and the force to calculate the stress. E=Stress/Strain. For fatigue you will need at least the sn curve for the basic materials.