11 November 2014 1 9K Report

What techniques can be used?

More Ahmad Nauman's questions See All
Can temperature change from room temp. to ~80 C affect the solubility or dissolution of ZnO NPs ?

.

01 February 2016 3,617 0 View

Is it possible to get high resistivity and low current values at higher electrolyte concentration?

During the electrolysis of water in the presence of KCl as electrolyte when I collect current and voltage data by oscilloscope, the current value decreases from 3A (at 100 ppm KCl concentration)...

11 December 2014 3,502 4 View

Is it possible to ppt out Cu(OH)2 at acidic pH (4-6)?

I'm synthesizing CuO at pH below neutral. In order to sort out mechanism when I see literature mostly CuO NPs are produced at higher pH by 2 step mechanism. First production of Cu(OH)2 and then...

11 December 2014 5,534 13 View

How it is possible that I dissolve CuCl2.2H2O in DI water & add KOH at 50oC to get Cu ppt. But when i do XRD there is no peak for any copper compound?

I have repeated this experiment many times and at different pH from 7-11 but every time XRD show nothing. can any one please explain this for me ??

10 November 2014 4,106 8 View

Is there any method to remove monovalent cations before detection of DI-valent ions by Cation IC?

I am using cation IC with a pre-concentrator for the detection of copper ions in waste-water. My samples often have a large concentration of Na, NH4 and K which interferes with the Copper peak as...

09 October 2014 9,590 11 View

Can someone please help me to find a some classical simple method for the quantification of copper in water at ppb level ?

Currently im using Ion chromatography but due to some interferences from Na ions, which have very close retention time to that of copper so that i can't quantify the copper very accurately. So i...

09 October 2014 9,746 19 View

How should i prepare sample for XRD analysis. I want to characterize CuO (expecting) nanoparticles ?? Whats the standard procedure for that ??

.

09 October 2014 3,594 1 View

Is their any simple method for determining the Free radicals (OH, O, H - individual detection/measurement) qualitatively or quantitatively in water ?

Thanks.

07 August 2014 6,403 7 View

How can I quantify the different Copper species present in water?

Is it possible to quantify the ionized Cu, Cu2O and Cu(OH)2 in a given water sample?

06 July 2014 5,500 17 View

What is the best material to carry out a radical reaction in the presence of metal ions?

I observe attachment of some particles (which I guess can be some form of metal which is present in solution) with the surface of glass reactor after the reaction. I don't know which material I...

05 June 2014 6,304 4 View

Similar questions and discussions
MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close