I already have the 5 mM Borate Buffer and the 100 mM Borate Buffer. I also have 10% BSA. How do I create 5 mL of the WB and 5 mL of the SB? I need these two buffers to couple carbon nanoparticles with an antibody (low molecular weight- 20 kDA). The antibody has a pH of 7.5 and has a concentration of 1 mg/mL.
Is it necessary to sterilize it if I am placing an antibody in it?
Do I just stir the two solutions together with incubation?
Thanks in advance!
L
Washing buffer
If the exact concentration of the borate buffer isn't that important, you can add 0.5 ml of 10% BSA and 4.5 ml of 5 mM borate buffer to get 5 ml of 4.5 mM borate buffer with 1% BSA.
Or you could add 0.25 ml of 100 mM borate buffer and 0.5 ml of 10% BSA and 4.25 ml of water to get 5 mM borate and 1% BSA.
Storage buffer
4.5 ml of 100 mM borate buffer and 0.5 ml of 10% BSA gives 5 ml of 90 mM borate buffer with 1% BSA.
If you need exactly 100 mM borate buffer, you will either have to start with a more concentrated borate buffer stock solution or dissolve the BSA directly in the 100 mM borate buffer.
PFA for calculation sheet. Hope it will help next time for calculation. just make stock solution higher than actual conc. required in final solution.
- Badges
- Science topic
- Similar topics
- Chemistry
- Nanotechnology
- Nanostructured Materials
- Nanoparticles