How can I apply cyclic load in ANSYS?

More Nancy el-refaey's questions See All

Difficulty Interpreting C-V Measurements for Graphene-Silicon Schottky Junction!?

I'm currently conducting research on synthesizing graphene via Chemical Vapor Deposition (CVD) (bilayer) for integration with P-type silicon to form Schottky junctions. My aim is to explore the...

27 April 2024 4,783 0 View

How can I deposit a layer of silicon dioxide on silicone wafer using dry deposition?

I need to form a SiO2 layer over a silicon wafer, I have a CVD setup and oxygen gas. I don't know at what temperature and how long for deposition to take place?

18 February 2022 1,263 8 View

Is gold compatible or incompatible element?

is gold compatible or incompatible element?

11 July 2019 5,579 6 View

How to prepare permanent slide for Chlamydomonas ?

chlamydomonas sp.

15 August 2016 2,196 3 View

This organism in the pictures belong to algae or not?

plankton

13 February 2016 9,419 15 View

Please, can anyone suggest me such paper(s) support that affinity of Zn and Ni onto goethite is higher than their affinity onto birnessite (Mn-oxide)?

By examined the adsorption capacity for a mixture solution of Cu, Zn and Ni onto goethite-rich soil and birnessite-rich soil, we recorded that the affinity of Zn and Ni in goethite-rich soil...

07 January 2016 2,740 1 View

Can anyone explain the data in the attached file?

I received the result of measuring specific surface area (SSA) for a clay fraction soil sample. This sample (size < 2 micron m) contain about 85 % smectite, 10% kaolinite, and 5 % illite. The...

22 May 2015 7,843 7 View

rosenberg self esteem scale ?

Please anyone has the arabic version of Rosenberg self-esteem scale and the study which approves the version validation

01 January 1970 4,359 1 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Tangential stiffness option in ansys workbench?

I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...

29 July 2024 2,032 2 View

How to Import Blade geometry from CAD file in ANSYS design modeler?

Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...

27 July 2024 356 3 View

Why my simulation results are showing too much deformation compared to experimental result?

I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...

13 July 2024 3,631 4 View

Can I transfer the 3D file from Matlab to Ansys or Abaqus?

I have a 3D output in the figure section of Matlab, does anyone know a way to transfer it to Abaqus or Ansys? Or in what format should I save it so that these analysis software can analyze it?

09 July 2024 9,226 3 View

How to solve the question of ansys fluent?

Regarding the system coupling issue where the update of the solution component fails, the system coupling update for fluid flow (Fluent) triggered an exception: "Update Solution Failed."

30 June 2024 7,894 1 View

How to import STL format into ANSYS APDL?

Hi everyone, I want to import an STL geometry (surface meshed with 2D meshes) into ANSYS APDL. After importing, I also want to mesh the structure with SOLID187 elements to convert it into a solid...

25 June 2024 4,286 4 View

What is the difference between the rotational velocity and cmrotate command in ansys?

I am trying the simulate the drum brake squeal in ansys. For giving the rotational velocity to drum what should i use the Rotational velocity or CMROTATE command.

24 June 2024 5,125 0 View

Next APDL command to get eigenvalues?

I need to get the eigenvalues after a modal analysis in ansys workbench. Is there any next APDL command that will get the required result.

20 June 2024 1,668 0 View

How to compile a udf in Fluent to import hourly weather data and update the boundary condition based on it ?

Hello all, I've compiled a udf which reads velocity data with corresponding time stamp from a .csv file using DEFINE_ON_DEMAND macro. Then, I use DEFINE_PROFILE to define an inlet velocity profile...

14 June 2024 6,480 0 View

Shrish Shukla

Here i enclosed a tutorial in which that process are explained please go through this tutorial & i suggest you that for more details about application of transient load you refer ansys program manual.

good luck

Sm. Arifur Rahman

Dear Mr. Shukla, the tutorial consists a sine function with a multiplication of 5000, how this function is chosen for this structure. can you please detail me about this concept.

Kamal Alogla

This link contain many examples.

http://www.mece.ualberta.ca/tutorials/ansys/

Dinesh R. Satpute

Do Transient analysis i. e. apply transient load in ANSYS

Ahmad Reshad Noori

It can be defined in Parameters -> Functions -> Define/Edit