CFD ANALYSIS OF HEAT EXCHANGER

MODELS DESIGN USING ANSYS FLUENT

Ram Kishan

M. Tech., Student, Department of Mechanical Engineering,

Sachdeva Institute of Technology, Farah, Mathura, India

Devendra Singh

Assistant Professor, Department of Mechanical Engineering,

Sachdeva Institute of Technology, Farah, Mathura, India

Ajay Kumar Sharma*

Assistant Professor, Department of Mechanical Engineering,

Institute of Engineering and Technology Lucknow, India

*Corresponding Author

ABSTRACT

The aim of the study is design tube and box heat exchanger

ABSTRACT

The aim of the study is design tube and box heat exchanger with various pattern of

tubes and examine the flow and temperature field at inlet and outlet point of tube and

container using ANSYS programming tool. Three types of heat exchangers are

planned in this examination with various structures of cylinders contains of 175 mm

breadth and 1000 mm length shell measurement 175 mm. To expand the rate of heat

exchange of heat exchanger advancement is done which tries to distinguish the best

parameter combination of heat exchangers. The prefix parameter (tube width) is

utilized as an info variable and the yield parameter is the most extreme temperature

distinction of container and tube heat exchanger. Three types models are design on

the basis tubes varieties of heat exchanger and CFX examination is completed in

ANSYS 14.0.