Oleic acid and TOPO passivated Co Nanoparticles show very high threshold voltage shift when used in a non volatile memory device as floating gate layer. How these are different from non-passivated nanoparticles?
general query
04 May 2019 5,749 1 View
What are methods for patterning and etching for FTO. Also, please consider to compare with ITO in this regard. Thank you,
10 November 2018 4,726 4 View
What are stages of Applied Physics Letters once you have submitted the article. And, also, how many days usually each step take?
10 November 2018 6,739 5 View
Typical available facilities are ALD, PECVD, LPCVD, MOCVD at our hand. Please give clear and detailed explanation. You may also suggest some other deposition methods for Multi-layer Graphene...
06 July 2018 2,264 3 View
I am analyzing AFM images and am bit confused between roughness of the surface and line profile ( analysing using Gwyddion)? Is line profile same as roughness in linear direction?? or not related...
11 December 2017 9,873 4 View
I have few profiles from AFM image using "extract profile icon" of Gywddion software? 2,3,4,6 are profiles corresponding to (smaller lines on image) probably showing agglomerated nanoparticels and...
11 December 2017 8,608 3 View
I have spin coated nanoparticles over silicon oxide substrate at different speeds and their AFM images show Rq values of 1.33 nm, 1.89 nm and 3.2 nm for these three samples. Also their uniformity...
11 December 2017 858 5 View
Let us consider case of image attached giving histogram of particles distributed over the substrate. Is it only two particles of same sizes being deposited in valley and on some height? Here,...
11 December 2017 6,513 0 View
Can you please let me know few of the best vacuum pumps used for laboratory desiccators with their brands and specifications.
10 November 2017 1,008 0 View
Whether it is crystalline, semi-crystalline or amorphous in nature? Also, can you please add some more information. Nanoparticles were synthesised in organic solvent and characterised as they were.
10 November 2017 3,652 7 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Palmitic acid presence in aqueous fraction
05 August 2024 8,624 4 View
I am analyzing cherts from different sources found within one specific geologic formation using ICP-MS/ES. My committee was asking this question about my analysis. I was not sure how to answer this
05 August 2024 7,902 3 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...
03 August 2024 2,730 1 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.
31 July 2024 9,140 2 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,420 1 View